Owner's Manual

Calibrate
(Hold for 5 sec.)
Bypass EQ
(Press for 1 sec.)
OEM Analog Inputs
Analog Outputs
USB
OEM Integration DSP
86
NOTE: Turn-on Sensing CH 1 Only
Turn-on Mode
Signal / DC Oset / Remote
L
R
Calibration Status:
Flashing Amber:
No Calibration
Amber:
Ready for Cal. Signal
Flashing Green:
Calibration in Progress
Green:
Calibration Successful
Flashing Red:
Calibration Failure
Alt. Green/Amber:
EQ Bypassed
Input Status 1-6:
Amber:
Power On, No Signal
Green:
Signal Present
Momentary Red:
Input Clipping
Valet In
Remote Out
+12VDC (Switched)
Ground
+12VDC (Battery)
6
4
5
FiX™ 86 Top View