Owner's Manual

Channels 1& 2 Channels 3 & 4
Speaker Outputs Speaker Outputs
-- (pg.8)-~----- (pg.8) _
JD1~O 1
PLANNING YOUR INSTALLATION
It is important that you take the time to read
this manual
and that you plan out your
installation carefully. The following are some
considerations
that you must take into account
when planning your installation.
Stupid Mistakes to Avoid:
• Check before drilling any holes in your vessel to
make sure that you will not be drilling through
the hull, a fuel tank, fuel line, wiring harness or
other vital vessel system.
• Do not
run system wiring outside or underneath
the vessel. This
is an extremely dangerous
practice which can result in severe damage to
your vessel and person.
• Protect all system wires from sharp edges
(metal, fiberglass, etc.) by carefully routing
them, tying them down and using grommets
and loom where appropriate.
• Do
not mount the amplifier in the engine
compartment or in any other area that will
expose the amplifier circuitry to the elements.
Safety Considerations:
Your amplifier needs to be installed in a dry,
well-ventilated environment
and in a manner
which does not interfere with your vessel's factory
installed electronic devices.
You should also take
the time to securely
mount the amplifier using the
supplied screws so that
it does not come loose in
the event ofa collision or a sudden jolt to the vessel.
If mounting the amplifier under a seat,
make sure there
is at least 1 inch (2.5 em) of
space above the amplifier's outer shell to permit
proper cooling.
Mounting the amplifier upside down is
strongly discouraged.
DIMPORTANTI
CHANNEl 31L) CHANNEL 41R}
02~0 (i)2~0
••••
Cooling Efficiency Considerations:
The outer shell of your IL Audio amplifier
is designed to remove heat from the amplifier
circuitry. For
optimum cooling performance,
this outer shell should be exposed to
as large a
volume
of air as possible. Enclosing the amplifier
in a small, poorly ventilated chamber
can
lead to excessive heat build-up and degraded
performance.
If an installation calls for an
enclosure around the amplifier, we recommend
that this enclosure
be ventilated with the aid
of a fan. In normal applications, fan-cooling
is not necessary.
CHANNEL 1 ILl CHANNEL 2 (R)
02'nO 02~0
DIMPORTANTI
While this amplifier is specially designed
for
marine applications, it is not waterproof
and it should not be mounted where it is
likely
to get wet.
.JL AUDIO M43DO
3