OWNER’S MANUAL Thank you for purchasing a JL Audio MediaMaster® Source Unit for your sound system. This product has been designed and manufactured to exacting standards in order to deliver years of musical enjoyment. For maximum performance, we highly recommend that you have your MM100s-BE installed by an authorized JL Audio dealer. Your authorized dealer has the training, expertise and installation equipment to ensure optimum performance from this product.
Protect Your Hearing! We value you as a long-term customer. For that reason, we urge you to practice restraint in the operation of this product so as to not damage your hearing and that of others in your vehicle. Studies have shown that continuous exposure to high sound pressure level can lead to permanent (irreparable) hearing loss. Mobile sound systems are capable of producing such high sound pressure levels. Please limit your continuous exposure at high volumes.
Safety Considerations • Install this product in a dry, wellventilated location that does not interfere with your factory-installed systems. If a dry environment is not available, a location that is not exposed to heavy splashing may be used. • While this product is designed to be water-resistant, it should never be submerged under water or subjected to high-pressure water spray. • Do not mount this product in an engine compartment or areas of extreme heat.
The MM100s-BE includes the following features: • Water-resistant chassis and display (IP66 rated) is built to withstand the elements • Easy-to-read, high-brightness, 3.
MOUNTING AND INSTALLATION The diagram below shows a typical mounting procedure into a fiberglass panel. Always follow proper safety procedures. Wear eye-protection at all times with a dust mask and gloves when cutting. A mounting template is included to aid in measuring and marking the mounting surface before cutting or drilling. 1. 2. 3. Press along the perforation to remove the center section of the mounting template. (Discard the center section.
GENERAL CONNECTIONS ANT – Motorola® Style Antenna AUX-IN – To PreAmp Aux Source ZONE1 (MAIN) ZONE2 To Amplifier ZONE3 ZONE4 USB – USB Storage Media or iPhone® 5 or beyond REMOTE – MMR-20-BE or MMR-10W Remote Controllers (sold separately) NMEA LEN 1 – NMEA 2000® Network (Micro-C connector) SIRIUSXM – SiriusXM® Connect Tuner (sold separately) POWER CONNECTIONS +12VDC (Red) – Switched +12V Power ILLUMINATION (Orange) – +12V Lighting Circuit GROUND (Black) – Ground AMP TURN-ON (Blue) – Remote Output to Amplifi
WIRING HARNESS CONNECTIONS Harnesses exiting the rear of the unit are used to connect to aftermarket amplifiers/ equipment and media devices. Depending on your specific equipment, you may or may not use all of the connections. Make sure to plan the layout of your system prior to routing wires and making connections. Refer to the table below for additional info.
GENERAL CONTROL FUNCTIONS Below is a list of general commands, including many common operations. The functionality of each control will vary depending on the current source and menu selected. Source/ Power Use this button to turn ON or OFF and to access the source selection menu. • Press to turn the unit ON • Press to display the SOURCE: Select menu • Press and hold to turn the unit OFF Use this knob as a Master Volume Control and for menu navigation/selection.
Turning the Unit ON / OFF 1. Press to turn the unit ON. 2. Press and hold to turn the unit OFF. Selecting a Source 1. Press to access the SOURCE: Select menu. 2. Rotate to highlight a desired source; press to select. Adjusting Volume The knob is designed to be used as a master volume controller, allowing easy adjustment of the audio levels, for all zones simultaneously or for each zone independently. Refer to Audio Zone Setup on pages 18-19 for more info. 1.
Favorites You may store up to 18 of your preferred stations or channels from your available tuner options (AM/FM/WB/SiriusXM®) as a preset for quick tuning access. Storing a Favorite 1. While listening to a desired channel (AM/FM/WB/SiriusXM®), press and hold until the star icon turns solid. Tuning to a Favorite 1. Press 2. Rotate to viewed stored presets. to highlight a desired preset; press to select. Moving or Deleting a Favorite 1. Press to viewed stored presets. 2.
Bluetooth® Audio You may wirelessly stream audio from a Bluetooth® compatible device from up to 35 ft. away (11 m). Up to 8 devices can be paired to the MM100s-BE, but only one streaming device can connect at one time. Pairing a new device: 1. Press on the MM100s-BE to access the SOURCE: Select menu. 2. Rotate to highlight Bluetooth® and press to select/enter Pairing Mode. 3.
Connecting USB Devices The USB port may be used to connect USB storage class devices (thumb drive, digital audio player, etc.). This USB connection also provides a 1A output for device charging. If this output is exceeded, an error message will display and the output will be disabled. Devices may be plugged directly into the USB port or use the JL Audio Combo 3.5 mm Audio Jack and 9 Wire USB Port for Panel-Mounting (XMDUSB/3.5MM-PNL).
Connecting an iPhone® An iPhone® may be connected to the USB port using an appropriate Lightning to USB cable (not included).
SiriusXM® Satellite Radio Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM® Connect Tuner, antenna and subscription are required. For more information, visit www.siriusxm.com. Activate your SiriusXM® service online or by phone For US Subscriptions: • Visit www.siriusxm.
SiriusXM® Main Menu The SiriusXM® Main Menu allows access to the following menu options: Browse by Channel – Lists your available channels. Browse by Category – Lists your available channels by categories. My Account info – Lists your account status, Radio ID and Reset menu. Parental Controls – Allows you to restrict channels containing mature content. Listening to SiriusXM® 1. Press and turn to select SiriusXM. 2. Press to begin listening to SiriusXM. Channel Selection 1.
Parental Controls Some SiriusXM® channels contain mature content. When the Parental Controls feature is enabled, channels with mature content are restricted and will require a 3-digit lock code to access. Resetting SiriusXM® Radio Settings A reset of the SiriusXM® tuner will erase all presets and settings, including parental controls, restoring all SiriusXM® settings back to their factory defaults. 1. Press to access the SiriusXM®: Main Menu. 2. Turn to My Account and press to enter. 3.
System Settings Main Menu This menu allows access the main operational settings and features of your MM100s-BE. Refer to the table below for available settings and functionality. 1. Press and hold to access the System Settings: Main Menu. 2. Turn to highlight one of the menu settings listed in the table below; press to select. 3. Use to make selections.
Audio Zone Setup The MM100s-BE is equipped with four sets of low-voltage, line-level RCA outputs to send audio signals to your aftermarket amplifiers/equipment. Each output pair delivers full-range, low-distortion audio, arranged into four zones. Depending on your equipment and vessel, this will allow you to group speakers of an area together for flexibility and control of audio levels at separate zones.
Level Control Mode This setting configures the behavior and control of each zone. Available control options are: Tone Control Mode This setting allows you to configure how the tone and balance controls of Zones 2, 3 and 4 are managed. Two control options are available: Relative: Use this setting to link the output levels of Zones 2, 3 or 4 with the level of Zone 1. When selected, Zone 2, Zone 3 or Zone 4’s volume level will proportionally track (follow) the volume of Zone 1.
Optional Remote Controllers Two remote contol options are available for your MediaMaster® (each sold separately). Each connnect directly using MediaMaster® controller cables and splitters (sold separately). Refer to the supplied Owner’s Manual for specific installation and operations instructions. MMR-20-BE Wired Remote Controller Adds water-resistant (IP67 rated) control functionality from auxiliary locations, such as separate audio zone locations positioned throughout a vessel.
Troubleshooting Problem Possible Cause Possible Solution Faulty fuse Remove fuse and check with continuity meter. Replace if necessary. Poor connection integrity Check “Ground” and “+12VDC” connections for pinched wires; ensure tight connections. Mute or Pause is on Press or press and hold from the Audio Zone Levels screen to verify that Mute is not on.
Specifications Electrical Specifications Operating Voltage Maximum Current Draw Standby Current Draw Fuse Value NMEA 2000® LEN Operating Temp Range 14.4V DC (10V – 15.9V allowable) 1.5 A 120 mA 5A 1 (Micro-C connector) -4 F to +158 F (-20 C to +70 C) Display Size / Type 3.
Limited Warranty – Electronics (USA) JL Audio warrants this product to be free of defects in materials and workmanship for a period of two (2) years from the original date of purchase. This warranty is not transferable and applies only to the original purchaser from an authorized JL Audio dealer.
