Manual

14
SiriusXM® Satellite Radio
Only SiriusXM® brings you more of
what you love to listen to, all in one
place. Get over 140 channels, including
commercial-free music plus the
best sports, news, talk, comedy and
entertainment. Welcome to the world
of satellite radio. A SiriusXM® Connect
Tuner, antenna and subscription are
required. For more information,
visit www.siriusxm.com.
Activating Your SiriusXM® Subscription
After installing your SiriusXM® Connect
tuner and antenna, power ON your
MM100s-BE and select SiriusXM® as a
source. You should be able to hear the
SiriusXM® Preview channel on Channel
1. If you cannot hear the preview
channel, please review the installation
instructions to make sure your SiriusXM®
Connect Tuner is properly installed.
After you can hear the Preview channel,
tune to Channel 0 to find the Radio
ID of your tuner. In addition, the
Radio ID is located on the bottom of
the SiriusXM® Connect Tuner and its
packaging. You will need this number
to activate your subscription. Write
this number down for reference.
Note: the SiriusXM® Radio ID does not
include the letters I, O, S or F.
Activate your SiriusXM® service online
or by phone
For US Subscriptions:
• Visit www.siriusxm.com/activatenow
• Call SiriusXM® Listener Care
at 1-866-635-2349
For Canadian Subscriptions:
• Visit www.siriusxm.ca/activatexm
• Call SiriusXM® Listener Care
at 1-877-438-9677
As part of the activation process,
the SiriusXM® satellites will send an
activation message to your tuner.
When your radio detects that the tuner
has received the activation message,
your radio will display: “Subscription
Updated”. Once subscribed, you can tune
to channels in your subscription plan.
Note: The activation process usually
takes 10 to 15 minutes, but may take up
to an hour. Your radio will need to be
powered ON and receiving the SiriusXM®
signal to receive the activation message.