Manual

17
Setting Function
Name this Device
Create a custom name to be displayed on connected Bluetooth®
devices and NMEA 2000® networks
Audio Zone Setup
Congure settings for each set of audio zone outputs (see pages 18-19
for more info).
AUX Input
Sensitivity
Congure the AUX input sensitivity: 2V or 1V RMS (default)
Diagnostic Displays serial number, hardware and software version info
Display Congures display and brightness settings
Low Voltage Alert Noties of low supply voltage conditions (see below for more info)
Scrolling Text Enables continuous scrolling of available RDS/track text info
Tuner Region Congures AM/FM tuner range/scale for a specic region
System Settings Main Menu
This menu allows access the main
operational settings and features of your
MM100s-BE. Refer to the table below for
available settings and functionality.
1. Press and hold to access
the System Settings: Main Menu.
2. Turn to highlight one of
the menu settings listed in the table
below; press to select.
3. Use to make selections.
Low Voltage Alert
This built-in alert notifies when the
+12VDC supply voltage drops below
10 volts. If triggered, the unit will enter
Safe Mode and mute the audio output.
A warning will also display on-screen
with instructions to turn the unit off until
normal operating voltage is restored.
1. Press and hold to access
the System Settings: Main Menu.
2. Turn to Low Voltage Alert
and press to enter.
3. Turn to select ON or OFF
and press to enter.