Brochure

MVi ampliers usher in a totally new
level of marine audio performance, with
all-new amplier circuitry and amazing
on-board tuning capabilities.
Each MVi model is packed with a
very complete package of digital signal
processing functions, including EQ, Delay,
Crossover Signal Routing, Mixing and
lots more. Instead of traditional knobs
and switches, JLAudio’s TüN
™
software is
used to set up all audio adjustments.
While operating the boat, stored DSP
presets can be recalled at the push of a
button with the optional M-DRC-50 Controller,
allowing you to instantly adjust the audio
system’s tuning to suit dierent activities.
MVi ampliers and their companion
MV subwoofer ampliers are built for
years of reliable marine service, featuring
a unitary cast alloy chassis with a marine-
grade powder coat nish and corrosion-
resistant hardware and connectors.
MVi Models
Full-Range Multi-Channel Amplifiers
MV400/4i: 4 x 75W @ 4 ohms; 4 x 100W @ 2 ohms
MV600/2i: 2 x 180W @ 4 ohms; 2 x 300W @ 2 ohms
MV600/6i: 6 x 75W @ 4 ohms; 6 x 100W @ 2 ohms
MV800/8i: 8 x 75W @ 4 ohms; 8 x 100W @ 2 ohms
Monoblock Subwoofer Amplifiers*
MV600/1: 1 x 400W @ 4 ohms; 1 x 600W @ 2 ohms
MV1000/1: 1 x 600W @ 4 ohms; 1 x 1000W @ 2 ohms
* MV amplifiers (non-DSP) are designed to be paired with
full-range MVi amplifiers.
System Amplifiers
MV700/5i: 4 x 75W + 180W @ 4 ohms;
4 x 100W + 300W @ 2 ohms
MV1000/5i: 4 x 75W + 400W @ 4 ohms;
4 x 100W + 600W @ 2 ohms
Power ratings for MVi amplifiers are based on the
“industry standard” rating method (14.4V supply voltage
w/less than 1% THD+N, all channels driven, RMS method)
Unprecedented, Onboard DSP Tuning Power
• Powerful DSP permits optimizing each channel’s timing,
frequency response and output levels, for exceptional
sound quality.
• Up to six sound presets can be stored and recalled via
the optional M-DRC-50 (Digital Preset Controller).
• TuN™ software delivers fast and easy setup, at your
fingertips. Make all adjustments with a clear interface.
Free TuN™ software is available for computers and most
handheld devices.
2nd-Gen NexD2™
Switching Amplier Technology
• Advanced, high-speed switching technology delivers
crystal-clear audio power and efficiency.
• MVi models: DSP-synchronized power supply and
output channels produce top-flight fidelity with
ultra-low noise and distortion.
• MV models: Specifically optimized for low frequencies
to deliver prcisely controlled bass output.
Ultra-Versatile Analog Inputs and Pre-Outs
• Differential-Balanced Analog Inputs offer outstanding
noise rejection for clean, clear audio.
• Accepts both line-level signals or speaker level signals,
without requiring a line-output-converter.
• Line-level, RCA jacks deliver up to 4 VRMS of analog
audio outputs.
JLid™ System Command with
Networking Capabilities
• Proprietary JLAudio protocol provides control and
communication interface for MVi amplifiers and
optional JLid™ accessories, including:
M-DRC-50 Digital Preset Controller: Convenient,
push-button, preset selection from the helm, with
corresponding RGB LED indicator.
MVi-HUB JLid-COMM and Network Bridge
Hub: Provides network connectivity for up to
six amplifiers (one “Master” MVi amplifier and
up to five “Slave” MV or MVi amplifiers) for full-
system DRC control and preset selection.
MVi-DRCADAPT Rotary DRC Adaptor: Permits
direct connection of a DRC-205 rotary controller
(non-marine) to an MVi amplifier.
VXi-BTC Bluetooth® Communicator: Adds wireless
connectivity for amplifier configuration from a
compatible iOS® or Android® device (not included).
Remarkably compact & powerful.
Second-Generation NexD2™
switching technology delivers
amazing power and fidelity in half
the space of conventional amplifiers!
(MV400/4i pictured)
Built for marine, period.
All MV and MVi amplifiers
feature rugged, marine-grade
construction and include water-
tight speaker connections and
corrosion-resistant hardware.
MVi-HUB JLid™-COMM &
Network Bridge Hub
Network up to six amplifiers (one "Master"
MVi amplifier and up to five "Slave"
MV or MVi amplifiers), with full-system
DRC control and preset selection.
M-DRC-50 Digital
Preset Controller
Offers convenient push-button
DSP preset selection from the
helm, with corresponding
RGB LED indicator.
VXi-BTC Bluetooth®
Communicator
Adds wireless connectivity
for a compatible iOS® or
Android® device, permitting
amplifier setup from these
devices (not included).
MVi-DRCADAPT
Rotary DRC Adaptor
Permits direct connection of a
DRC-205 rotary controller (non-
marine) to an MVi amplifier.
Note: Some product images on this page are shown with wiring removed.
Actual product has non-removable wiring.
MVi: Maxed.
Reference-grade marine amplifiers with integrated DSP.
22