Mobile Channel Amplifier Owner's Manual

ENGLISH

INPUT SENSITIVITY CONTROLS

The controls labeled “Input Sens.” located in

each channel section can be used to match the

source unit’s output voltage to the input stage of

each pair of amplifier channels for maximum

clean output. Rotating the control clockwise will

result in higher sensitivity (louder for a given

input voltage). Rotating the control counter-

clockwise will result in lower sensitivity (quieter

for a given input voltage.)

To properly set the amplifier for maximum

clean output, please refer to Appendix A (page

14) in this manual. After using this procedure,

you can then adjust any or all “Input Sens.”

levels downward if this is required to achieve the

desired system balance.

Do not increase any “Input Sens.” setting for

any channel(s) of any amplifier in the system

beyond the maximum level established during

the procedure outlined in Appendix A (page 14).

Doing so will result in audible distortion and

possible speaker damage.