Data Sheet
Table Of Contents
- 1 Description
- 2 RoHS compliance
- 3 Applications
- 4 Software architecture
- 5 Hardware specifications
- 6 Hardware block diagram
- 7 Hardware design
- 8 Regulatory compliance
- 9 Ordering information
- 10 Revision history
SPBT2632C2A Hardware specifications
Doc ID 022833 Rev 4 11/27
5.3 High speed CPU mode current consumption
● High speed CPU mode
– CPU 32 MHz
– UART supports up to 921 Kbps
– Data throughput up to 1.5 Mbps
– Shallow sleep enabled.
5.4 Standard CPU mode current consumption
● Standard CPU mode
–CPU 8 MHz
– UART supports up to 115 Kbps
– Data throughput up to 200 Kbps
– Shallow sleep enabled.
Table 3. High speed CPU mode current consumption
Modes (typical power consumption) Avg. Unit
ACL data 115 K baud UART at max. throughput (master) 23 mA
ACL data 115 K baud UART at max. throughput (slave) 27.5 mA
Connection, no data traffic, master 9.1 mA
Connection, no data traffic, slave 11.2 mA
Connection 375 ms sniff (external LPO required) 490 µA
Standby, without deep sleep 8.6 mA
Standby, with deep sleep, no external LPO 1.7 mA
Standby, with deep sleep, with external LPO 70 µA
Page/inquiry scan, with deep sleep, no external LPO 2.7 mA
Page/inquiry scan, with deep sleep, with external LPO 520 µA
Bluetooth power down / CPU standby, no external LPO 25 µA
Table 4. Standard CPU mode current consumption
Modes (typical power consumption) Avg. Unit
ACL data 115 K baud UART at max. throughput (master) 16.7 mA
ACL data 115 K baud UART at max. throughput (slave) 18 mA
Connection, no data traffic, master 4.9 mA
Connection, no data traffic, slave 7.0 mA
Connection 375 ms sniff (external LPO required) 490 µA
Standby, without deep sleep 4.2 mA
Standby, with deep sleep, no external LPO 1.7 mA