Data Sheet

Hardware specifications SPBT2632C2A
12/27 Doc ID 022833 Rev 4
5.5 I/O operating characteristics
5.6 Selected RF characteristics
Standby, with deep sleep, with external LPO 70 µA
Page/inquiry scan, with deep sleep, no external LPO 2.6 mA
Page/inquiry scan, with deep sleep, with external LPO 520 µA
Bluetooth power-down / CPU standby, no external LPO 25 µA
Table 4. Standard CPU mode current consumption (continued)
Modes (typical power consumption) Avg. Unit
Table 5. I/O operating characteristics
Symbol Parameter Min. Max. Unit Conditions
V
IL
Low-level input voltage - 0.6 V V
IN
, 2.1 V
V
IH
High-level input voltage 1.4 - V V
IN
, 2.1 V
V
OL
Low-level output voltage - 0.4 V V
IN
, 2.1 V
V
OH
High-level output voltage 1.8 - V V
IN
, 2.1 V
I
OL
Low -level output current - 4.0 mA V
OL
= 0.4 V
I
OH
High-level output current - 4.0 mA V
OH
= 1.8 V
R
PU
Pull-up resistor 80 120 kΩ Resistor turned on
R
PD
Pull-down resistor 80 120 kΩ Resistor turned on
Table 6. Selected RF characteristics
Parameters Conditions Typical
(1)
1. RF characteristics can be influenced by physical characteristics of final application.
Unit
Antenna load 50 ohm
Radio receiver
Sensitivity level BER < .001 with DH5 -86 dBm
Maximum usable level BER < .001 with DH1 0 dBm
Input VSWR 2.5:1
Radio transmitter
Maximum output power 50 Ω load 0 dBm
Initial carrier frequency tolerance 0 kHz
20 dB bandwidth for modulated carrier 935 kHz