Data Sheet

Table Of Contents

SPBT2632C2A Hardware specifications

Doc ID 022833 Rev 4 13/27

5.7 Pin assignment

Table 7. Pin assignment

Name Type Pin# Description ALT function

(1)

1. Please note that the usage of ALT function is dependant upon the firmware that is loaded into the module,

and is beyond the scope of this document. The AT command interface uses the main UART by default.

5 V

tolerant

UART interface

RXD I 13 Receive data ADC 3 Y

TXD O 14 Transmit data ADC 2 Y

RTS O 12 Request to send (active low)

ADC 0 I

C clock/aux UART

CTS I 11 Clear to send (active low)

ADC 1 I

C data/aux UART

Boot loader

Boot 0 I 9 Boot 0

Power and ground

Vin 8 V

GND 7 GND

Reset

RESETN I 10 Reset input (active low for 5 ms)

2.5 V

max.

LPO

LPO I 15 LPO input

GPIO - general purpose input/output

GPIO [1] I/O 1 General purpose input/output SPI MISO Y

GPIO [2] I/O 2 General purpose input/output SPI MOSI/I2S_SD Y

GPIO [3] I/O 3 General purpose input/output SPI SCLK/I2S_CK Y

GPIO [4] I/O 4 General purpose input/output SPI SS/I2S_WS Y

GPIO [5] I/O 5 General purpose input/output Y

GPIO [6] I/O 6 General purpose input/output DAC Y

GPIO [7] I/O 16 General purpose input/output ADC 4 Y