Parts Manual Owner's manual

3120820 1-13
S
E
C
T
I
O
N
1
F
R
A
M
E
SECTION 1 FRAME
FIGURE 1-4. TIRE AND WHEEL DRIVE INSTALLATIONS
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
TIRE AND WHEEL DRIVE INSTALLATIONS Ref.
0252606 WHEEL DRIVE INSTALLATION Ref. 3
1 2780189 Drive Hub Assembly (See Figure 1-5 for Breakdown) 4
2
Drive Brake Assembly Options (See Figure 1-6 for
Breakdown):
4
0920084 Prior to S/N 33476
0920110 S/N 33476 to Present
3
Drive Motor Assembly Options (See Figure 1-7 for
Breakdown):
4
See Note
Prior to July 1995 (was p/n 3160176)
Note: Use p/n 3160213 Motor Plus p/n 2900869
Conversion Kit as Replacement.
3160213
July 1995 to Present (See Figure 1-7 for
Breakdown)
4 4300092 Stud 1/2"-13NC x 5 1/2" (2 Per Wheel) 8
5 4761800 Lockwasher 1/2" (2 Per Wheel) 8
6 4751800 Flatwasher (2 Per Wheel) 8
7 3311801 Nut 1/2"-13NC (2 Per Wheel) 8
8Not Used
9 0642216 Bolt 3/4"-10NC x 2" (12 Per Wheel) 48
10 4762200 Lockwasher 3/4" (12 Per Wheel) 48
11 3300007 Lugnut 3/4"-16NC (12 Per Wheel) 48
— — — — — — — — — —
0100011 Loctite #242 A/R
TIRE AND WHEEL INSTALLATION (FOAM-FILLED) Ref.
0251590 Prior To S/N 43718 Ref. 2
0259545 S/N 43718 To Present Ref. A
12 Tie and Wheel Assembly (Foam-Filled) Options: A/R
0251589 Prior To S/N 43718 4
S/N 43718 To Present :
0259444 Right Side (Foam-Filled) 2
0259445 Left Side (Foam-Filled) 2
Note: Assemblies may require ballast/foam
filling to manufacturer’s specifications prior to
installing on a machine. Refer to Operation &
Safety or Service & Maintenance Manuals.
Purchase individual tire and/or rim only if able
to foam fill tire & wheel assembly, otherwise,
purchase complete assembly.
Tire Options: 4
4520136 Tire 445/65R x 22.5 (Prior to S/N 43718)
4520218
Tire 445/65 x 22.5 (S/N 43718 To
Present)