Parts Manual Instruction Manual

3121172 1250AJP 2-77
SECTION 2 TURNTABLE
FIGURE 2-16. GROUND CONTROLS INSTALLATION (WITHOUT UGM)
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref. Note: For Module Identification, refer to Revision Log page A.
Ref. GROUND CONTROLS ASSEMBLIES
0861629 Ref. Machines with Rexroth Pumps Prior to S/N 0300087575 M
0861750 Ref. Machines with Rexroth Pumps S/N 0300087575 to Present K
Ref. Note: S/N 0300085693 & S/N 0300085910 was built with
03000861750 Ground Control Box Also.
1001111545 Ref. Machines with Sauer Pumps E
1001121826 Ref. Light Panel Installation (All Specs Except Australian & CE) A
1001121827 Ref. Light Panel Installation (Australian & CE Specs) A
1 0100048 A/R Grease, Dielectric
2 0100081 A/R Loctite #454
3 0630464 2 Screw, Button Head #10-24NC x 1/2”
4 0630518 2 Screw, Button Head #10-24NC x 3/4”
5 0630548 5 Screw, Self Tapping
6 0641406 1 Bolt 1/4”-20NC x 3/4”
7 0861628 1 Box Assembly (See Items 301-310 for Breakdown)
8 1320095 2 Clamp
9 1600333 1 Module, Ground Control (Note: Control System must be
recalibrated when Module is replaced)
2915024 1 Update Kit (Includes Cables, Programming Instructions
& CD Software)
10 1670829 1 Bezel
11 1705132 1 Decal - ADE
12 1 Decal - Light Panel Options:
Use 100112283 All Specs Except Australian & CE Spec (was p/n1705974)
1705974 Australian & CE Spec
13 1705799 1 Decal - Lid
14 2420172 1 Hourmeter
15 2760105 1 Housing, Light
16 3300408 2 Locknut, Nylon
17 3311001 2 Nut #10-24NC
18 3311401 11 Nut 1/4”-20NC
19 Not Used
20 3740049 2 Relay
21 4060906 9 Guard, Switch
22 4360328 9 Switch, Toggle
23 4360475 1 Switch, Push-Pull Emergency
23A 7020175 1 Cap
23B 7020176 1 Block, Contact
24 4360476 1 Block, Contact
25 4460470 2 Nut, Terminal
26 4460471 2 Washer, Terminal
27 4460473 2 Clamp, Cable (Note: Now included with Boom Cable)
28 4460526 1 Connector, Strain Relief
29 4460865 1 Connector - 19 Pin (Note: Now included with Boom Cable)
30 4460874 1 Connector, White
31 4460875 1 Connector, Gray