Parts Manual Instruction Manual

3121172 1250AJP 2-103
SECTION 2 TURNTABLE
FIGURE 2-22. 2500W GENERATOR INSTALLATION - DEUTZ MACHINES (OPTIONAL)
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref. Note: For Module Identification, refer to Revision Log page A.
Ref. 2500W GENERATOR INSTALLATION
Ref. 110Volt - 60Hz (ANSI & ANSI Export Specs)
0272094 Ref. Without UGM (Prior to S/N 0300082503) D
0274083 Ref. Without UGM (S/N 0300082503 to Present) B
1001125425 Ref. With UGM A
Ref. 110Volt - 50Hz (CE Spec)
0272715 Ref. Without UGM (Prior to S/N 0300082503) B
0274101 Ref. Without UGM (S/N 0300082503 to S/N 0300129829) B
1001100500 Ref. Without UGM (S/N 0300129829 to Present) C
1001125429 Ref. With UGM A
Ref. 220Volt - 50Hz (CE Spec)
0272095 Ref. Without UGM (Prior to S/N 030082503) C
0274100 Ref. Without UGM (S/N 0300082503 to S/N 0300129829) A
1001100501 Ref. Without UGM (S/N 0300129829 to Present) C
1001125426 Ref. With UGM A
1 0100011 A/R Compound, Locking
2 0200742 1 Arm, Adjusting
3 0363081 1 Bar, Mounting
4 0363082 1 Bar, Adjusting
5 1 Belt Options:
0480127 ANSI & ANSI Export Specs
0480122 CE Spec
6 0641406 1 Bolt 1/4”-20NC x 3/4”
7 0641508 1 Bolt 5/16”-18NC x 1”
8 0641608 4 Bolt 3/8”-16NC x 1”
9 0641610 2 Bolt 3/8”-16NC x 1 1/4”
10 0641718 2 Bolt 7/16”-14NC x 2 1/14”
11 0701418 2 Bolt M14 x 50mm
12 0721006 2 Screw #10-24NC x 3/4” (Prior to S/N 0300080338)
13 0902813 1 Bracket, Arm Mounting
14 1 Generator and Control Box Assembly Options:
110V/60Hz Assembly (ANSI & ANSI Export Specs)
Use 2460055 Prior to S/N 0300080338 (was p/n 2460032)
2460055 S/N 0300080338 to Present
110V/50Hz Assembly (CE Spec)
Use 2460057 Prior to S/N 0300080338 (was p/n 2460039)
2460057 S/N 0300080338 to S/N 0300129806
2460049 S/N 0300129806 to Present (Generator Only)
220V/50Hz Assembly (CE Spec)
Use 2460056 Prior to S/N 0300080338 (was p/n 2460013)
2460056 S/N 0300080338 to S/N 0300129806
1001100321 S/N 0300129806 to Present (Generator Only)