Parts Manual Instruction Manual

3121172 1250AJP 2-119
SECTION 2 TURNTABLE
FIGURE 2-25. CLEARSKY TELEMATICS INSTALLATION (WITHOUT UGM)
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref. NOTE: Clearsky Telematics is Standard Equipment on
Machines S/N 139299 to Present Delivered In North American.
Ref. Note: For Module Identification, refer to Revision Log page A.
1001100441 Ref. CLEARSKY TELEMATICS INSTALLATION C
1 0100011 A/R Compound, Locking
2 0641406 4 Bolt 1/4”-20NC x 3/4”
3 0641410 2 Bolt 1/4”-20NC x 1 1/4”
4 0642612 1 Bolt 1”-8NC x 1 1/2”
5 3311402 2 Nut, Jam 1/4”-20NC
6 3311405 9 Locknut 1/4”-20NC
7 3931412 2 Capscrew 1/4”-20NC x 3/4”
8 3931416 2 Capscrew 1/4”-20NC x 1”
9 4240033 A/R Strap, Tie
10 4711400 15 Flatwasher 1/4” Thin
11 4712600 1 Flatwasher 1” Thin
12 1001100062 1 Module
13 1001100432 1 Support, Controller
14 1001100434 1 Mount, Module
15 1001100468 1 Harness, Telematics (See Section 7 for Breakdown)
16 1001100672 1 Mount, Antenna
17 1001100876 1 Cover
18 4460488 2 Mount, Tie Strap
19 Not Used
20 1001103356 1 Ground Wire
21 4460496 1 Lockwasher, Strain Relief
22 4460497 1 Nut, Strain Relief
Ref. CLEARSKY TELEMATICS CONTROLLERS (Factory Installed)
1001102839 Ref. ANSI Spec B
1001102840 Ref. ANSI Export/Australian/CE/Japanese Specs B
1001104734 Ref. CSA Specs B
101 1 Controller, Telematic Kit Options (Includes Items 102 & 103):
1001100352 ANSI Spec
1001102831 ANSI Export/Australian/CE/Japanese Specs
1001104735 CSA Specs
102 70002296 1 Antenna & Harness
103 1 Controller, Telematics Options:
70002293 ANSI Spec
70002295 ANSI Export/Australian/CE/Japanese Specs
70002294 CSA Specs