Parts Manual Instruction Manual

3-28 1250AJP 3121172
SECTION 3 BOOM
FIGURE 3-7. BOOM SENSORS AND SWITCHES INSTALLATION
ITEM # PART NUMBER QTY. DESCRIPTION REV.
0273121 Ref. BOOM SENSORS AND SWITCHES INSTALLATION O
1 0100011 A/R Compound, Locking
2 0100035 A/R Compound, Locking
3 0363224 2 Bar, Sensor Mounting
4 0630464 3 Screw, Button Head #10-24NC x 1/2”
5 0641405 2 Bolt 1/4”-20NC x 5/8”
6 0641505 1 Bolt 5/16”-18NC x 5/8”
7 0641509 1 Bolt 5/16”-18NC x 1 1/8” (Prior to S/N 0300078050 Only)
8 3930606 12 Capscrew #6-32NC x 3/8”
9 0791504 17 Screw 5/16”-18NC x 1/2”
10 0791506 20 Screw 5/16”-18NC x 3/4”
11 0791604 26 Screw 3/8”-16NC x 1/2”
12 0791605 6 Screw 3/8”-16NC x 5/8”
13 0791606 2 Screw 3/8”-16NC x 3/4”
14 0791608 2 Screw 3/8”-16NC x 1”
15 0791810 2 Screw 1/2”-13NC x 1 1/4”
16 4240018 A/R Tie-Strap (Not Shown)
17 1320301 7 Clamp, Hose
18 1660261 2 Coupling, Rotary Sensor
19 1671039 1 Cover, Jib Switch
20 1671040 1 Cover, Sensor
21 1671044 2 Cover, Level Sensor
22 1671112 2 Cover, Angle Sensor
23 1671113 2 Cover, Limit Switch
24 1671117 1 Cover, Limit Switch
25 3380528 2 Cover, Rotary Sensor
26 1671123 1 Cover, Main Base Hose
27 2080068 6 Fastener, Insert 1/4”-20NC (Prior to S/N 0300088385)
28 3200433 1 Mount, Jib Switch
29 3200458 2 Mount, Coupling
30 1 Mount Options:
3200460 Prior to S/N 0300083153 (Boom Angle Switch)
4340959 S/N 0300083153 to Present (Sensor Mount Weldment)
31 3300364 14 Nut, Tinnerman 5/16”-18NC
32 3300430 2 Nut, Acorn 1/4”-20NC
33 3311405 10 Locknut 1/4”-20NC
34 3311505 1 Locknut 5/16”-18NC (Prior to S/N 0300078050 Only)
35 3311608 2 Nut, Flanged 3/8”-16NC
36 1 Pin, Sensor Options (Note: Control System must be recalibrated
when Switch is replaced):
3422942 1 Prior to S/N 0300090594
3423256 1 S/N 0300090594 to Present
37 4340810 1 Mount, Sensor (Upper)
38 4340811 1 Mount, Sensor (Lower)
39 3780383 1 Ring
40 3930816 14 Capscrew #8-32NC x 1”
41 3931020 2 Capscrew #10-24NC x 1 1/4”
42 3931412 4 Capscrew 1/4”-20NC x 3/4”