Parts Manual Instruction Manual

3121172 1250AJP 4-3
SECTION 4 PLATFORM
FIGURE 4-1. PLATFORM COMPONENTS INSTALLATION
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref. PLATFORM ASSEMBLIES
Ref. 8ft (2.44m) with No Mesh
Use 1001144023 Ref. Prior to S/N 0300168212 (was p/n 3510822) J
1001144023 Ref. S/N 0300168212 to Present B
Ref. 6ft (1.83m) with No Mesh
Use 1001144024 Ref. Prior to S/N 0300168212 (was p/n 3510833) I
1001144024 Ref. S/N 0300168212 to Present B
Ref. Note: Platform and Mesh must be ordered separately for
Platforms with Mesh. See Section 10 for Mesh
Installations.
Ref. Note: For Fall Arrest Platform Machines See Section 10.
Ref. Note: Replacement Decals Must Be Ordered Separately -
See Section 8.
Ref. Note: When replacing 8ft/2.44m platform with Soft Touch
option, new Soft Touch Rail p/n 4846673 must be
purchased to accommodate limit switch locations.
Ref. Note: When replacing platform on machines with
SkyCutter option, new bracket p/n 1001145405 must be
purchased to accommodate SkyCutter components.
1Not Used
2 2080040 16 Fastener, Huck
3 2600281 2 Hinge, Self-Closing
4 2940074 1 Latch
5Not Used
6 Not Available 1 Platform Weldment (Purchase Platform Assembly)
7 1 Cap-Plug Options:
3520072 Prior to S/N 0300162288
1001144630 S/N 0300162288 to Present
8 3820020 4 Rivet
9Not Used
10 1 Gate Weldment Options:
4846452 Prior to S/N 0300162288
1001144629 S/N 0300162288 to Present
11 3520198 2 Square Tube - Plug