Parts Manual Instruction Manual

7-44 1250AJP 3121172
SECTION 7 ELECTRICAL
812 Ref. AC Breaker Box Installation (CE Spec) Options:
1001096163 Ref. Without Powermite Generator Control Box C
1001109557 Ref. With Powermite Generator Control Box A
812A 1320041 1 Clamp, Cable
812B 1001096172 1 Bracket, Circuit Breaker Box
812C 1 Box Kit, Circuit Breaker Options:
Use 1001109654 Without Powermite Generator Control Box S/N
0300087575 to S/N 0300136326) (was p/n 1001096070)
1001109654 Without Powermite Generator Control Box
(S/N 0300136326 to Present)
1001109648 With Powermite Generator Control Box
See Note Machines with 1 Circuit Breaker
Ref. Note: Kit with a single large breaker. Replace with
2 breakers. For machines WITH Powermite Genera-
tor Control Box use qty 1 each of p/ns 1001109447
& 1001109482. For machines WITHOUT Powermite
Generator Control Box use qty 1 each of p/ns
1001109475 & 1001109482.
Machines with 2 Circuit Breakers
1001109475 16 Amp (Without Generator Control Box)
1001109477 10 Amp (With Generator Control Box)
1001109482 1 30mA
0861880 1 Box, Breaker
4460956 1 Barrier, Terminal Block End
4460957 1 Block, Terminal
812D 1001101191 1 Connector, Strain Relief
812E 1001097150 Connector, Strain Relief
812F 1060908 12ft/3.6m Cable, Electrical 12/3
812G 0903484 1 Bracket, AC Receptacle
813 1001100468 1 ClearSky Telematics Harness (Standard on Machines
S/N 0300139299 to Present delivered in North America.
Optional on all other machines.)
G
813A Use 1001100468 1 Harness, Telematics Gateway Controller
813B 4460909 1 Plug, Male - 12 Position (Black)
Not Available 1 Socket
4460916 11 Plug, Seal
4460915 1 Wedge Lock
813C 4460908 1 Plug, Male - 12 Position (Gray)
Not Available 6 Socket
4460916 6 Plug, Seal
4460915 1 Wedge Lock
813D 4460892 2 Connector, Bussbar (Includes Wedge Lock)
4460894 2 Plug, Male - 6 Position (Includes Wedge Lock)
4460465 4 Socket
4460916 8 Plug, Seal
Not Available 1 Wedge Lock (Included with P/Ns 4460892 & 4460894)
813E 77363243 2 Receptacle, Female - 3 Position
4460943 4 Pin
77363245 1 Wedge Lock
FIGURE 7-3. HARNESS COMPONENTS INSTALLATION (WITHOUT UGM) (S/N 0300087575 TO
PRESENT) (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.