Service Manual Manual

SECTION 3 - 1CHASSIS & TURNTABLE
3-76 – JLG Lift – 3121171
Motor and Brake Assembly
1. Place O-ring (27) onto end of Brake (26) and locate
brake into pilot of cover.
2. Place Gasket (31) onto the brake face and line up
the holes.
3. Place Motor (10) into Brake pilot against the Gasket
(31).
4. Assemble Lift Lugs (28) onto Hex Bolts (29). Assem-
ble Hex Bolts (29) with Lift Lugs through the Motor
(10) and Brake (26) against the motor flange. Torque
to 35 ft-lbs.
5. Fill Brake (26) with 2.7 oz. (80cc) of BRAKOILVG32
(DTE24).
10. Hydraulic Motor
26. Hydraulic Brake
27. O-Ring
28. Lift Lug
29. Bolt
31. Gask et
Figure 3-45. Swing Drive - Motor and Brake Assembly