Service Manual Manual

SECTION 6 - JLG CONTROL SYSTEM
3121171 – JLG Lift – 6-29
JIB SWING:
ACCEL X.Xs Displays/adjusts jib swing acceleration 0.1 to 5.0 sec 1.5
DECEL X.Xs Displays/adjusts jib swing deceleration 0.1 to 3.0 sec 0.5
MIN LEFT XX%
Displays/adjusts minimum jib left speed.
Same as Creep speed
0 to 65% 40
MAX LEFT XXX% Displays/adjusts maximum jib left speed 0 to 100% 70 42-47 (125)
MIN RIGHT XX%
Displays/adjusts minimum jib right speed.
Same as Creep speed
0 to 65% 40
MAX RIGHT XXX% Displays/adjusts maximum jib right speed 0 to 100% 70 42-47 (125)
GROUND MODE:
m. LIFT UP XXX% Displays/adjusts fixed main lift up speed 0 to 100% 60
m. lift DN XXX% Displays/adjusts main lift down speed 0 to 100% 60
SWING XXX% Displays/adjusts fixed swing speed 0 to 65% 45
BASKET LVL XXX% Displays/adjusts fixed basket level speed 0 to 100% 75
BASKET ROT XXX% Displays/adjusts fixed basket rotate speed 0 to 100% 75
MAIN TELE XXX%
Displays/adjusts fixed main telescope
speed
0 to 100% 65
TOWER TELE XXX%
Displays/adjusts fixed tower telescope
speed
Not displayed if TOWER TELE=NO
40 to 40% 40
T. LIFT UP XXX%
Displays/adjusts fixed tower lift up speed
Not displayed if TOWER LIFT=NO
40 to 40% 40
T. LIFT DN XXX%
Displays/adjusts fixed tower lift down
speed
Not displayed if TOWER LIFT=NO
40 to 40% 40
JIB (U/D) XXX%
Displays/adjusts jib lift speed
Not displayed if JIB = 0
0 to 100% 60
JIB (L/R) XXX%
Displays/adjusts jib swing speed
Displayed if JIB = 2
0 to 100% 70
GEN SET/WELDER:
Engine XXXX RPM
Control generator/welder RPM. Not dis-
played if GEN SET/WELDER = 0
1200-2800 1800
NOTES: Personality settings can be adjusted anywhere within the adjustment range in order to achieve optimum machine performance.
S top watch sho uld star t when the f unc tio n is act iva ted.Not wit h th e controlle r or switch.
U nless not ed, fun ction s pee ds s hould be mea sur ed from pl atform .
P latfor m spe ed k nob must be a t full speed (fu lly clockwi se) .
Al l test shoul d be done with the oil tem p above 100° F ( 38° C).
4150517-4
Table 6-4. Machine Personality Settings and Speeds