Service Manual

SECTION 4 - CONTROL COMPONENTS

3121231 – JLG Lift – 4-7

1. Ground Control Module (a) 4. Right Side Battery (b) ) 7. Power Cable To Right Drive Motor/Brake (a)

2. Left Side Battery (b) 5. Traction Control Module (a) 8. Pump/Motor/Tank Assembly (b)

3. 175 Amp Inline Fuse 6. Power Cable To Left Drive Motor/Brake (a) 9. Battery Disconnect (Option)

Ground Control P1 - Horn, Alarm, Beacons, Lift Down Valve Harness (a) P4 - Platform Junction Box Harness (a)

Module Plugs: P2 - PHP, Elevation/Speed, Charger Limit Switch Harness (a) P5 - Joystick Protocol Harness (a)

P3 - Programmable Security Lock Harness (Option) (a)

Notes: (a) Apply di-electric grease JLG Part Number 3020038 to wiring harness terminals, to prevent moisture from entering module.

(b) Seal NEG (–) and POS (+) posts with battery grease to prevent corrosion.

Figure 4-2. Component Electrical Connections. (2-12V Batteries shown)

(+)

(–)

(+)

(–)

(+)

M1 M2