Operator Manual Owner manual
Table Of Contents
- Section 1. SAFETY PRECAUTIONS
- Section 2. USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
- Section 3. MACHINE CONTROLS AND INDICATORS
- Section 4. MACHINE OPERATION
- 4.1 Description
- 4.2 Boom Operating Characteristics and Limitations
- 4.3 CAPACITY SELECT
- 4.4 ENGINE OPERATION
- 4.5 Traveling (Driving)
- 4.6 STEERING
- 4.7 EXTENDING THE AXLES
- 4.8 PLATFORM
- 4.9 Boom
- 4.10 Function Speed control
- 4.11 EMERGENCY TOWING
- 4.12 SHUT DOWN AND PARK
- 4.13 LIFTING AND TIE DOWN
- 4.14 STOWING THE JIB FOR TRANSPORT
- Section 5. LCD DISPLAY PANEL
- 5.1 Description
- 5.2 Boot up Splash Screen
- 5.3 Machine Operating Screen
- 5.4 KeySwitch In Ground Mode:
- 5.5 Function Speed
- 5.6 CAN Bus Lost
- 5.7 Take Foot Out
- 5.8 Put Foot In
- 5.9 BCS Lamp On
- 5.10 Broken Cable
- 5.11 Platform Level
- 5.12 Platform Overload
- 5.13 Capacity Mode Error
- 5.14 Swing DTCs
- 5.15 Jib Unlocked
- 5.16 Jib Locked
- 5.17 Chassis Status
- 5.18 Machine Tilted Mode
- 5.19 Envelope Status
- 5.20 Machine Model Unknown
- Section 6. EMERGENCY PROCEDURES
- Section 7. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
- Section 8. INSPECTION AND REPAIR LOG
SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121618 – JLG Lift – 7-1
SECTION 7. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
7.1 INTRODUCTION
This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual.............................................3121619
Illustrated Parts Manual ................................................................3121620
7.2 OPERATING SPECIFICATIONS AND PERFORMANCE
DATA
Operating Specifications
Table 7-1. Operating Specifications
Capacity - ANSI
U nrest ric ted
R estr ic ted
500 lbs (227 kg)
1000 lbs (454 kg)
Capacity - CE & Australia
U nrest ric ted
R estr ic ted
500 lbs (230 kg)
1000 lbs (450 kg)
Maximum Travel Grade, stowed
Position (Gradeability) see Figure 4-3.
40%
Maximum Travel Grade, stowed
Position (Side Slope) see Figure 4-4.
5°
Drive Speed 2.8 mph (4.5 kph)
Drive Speed at Elevation 0.3 mph (0.48 kph)
Gross Machine Weight - Approximate 59,900 lb. (27170 kg.)