Operator Manual Owner manual
Table Of Contents
- Section 1. SAFETY PRECAUTIONS
- Section 2. USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
- Section 3. MACHINE CONTROLS AND INDICATORS
- Section 4. MACHINE OPERATION
- 4.1 Description
- 4.2 Boom Operating Characteristics and Limitations
- 4.3 CAPACITY SELECT
- 4.4 ENGINE OPERATION
- 4.5 Traveling (Driving)
- 4.6 STEERING
- 4.7 EXTENDING THE AXLES
- 4.8 PLATFORM
- 4.9 Boom
- 4.10 Function Speed control
- 4.11 EMERGENCY TOWING
- 4.12 SHUT DOWN AND PARK
- 4.13 LIFTING AND TIE DOWN
- 4.14 STOWING THE JIB FOR TRANSPORT
- Section 5. LCD DISPLAY PANEL
- 5.1 Description
- 5.2 Boot up Splash Screen
- 5.3 Machine Operating Screen
- 5.4 KeySwitch In Ground Mode:
- 5.5 Function Speed
- 5.6 CAN Bus Lost
- 5.7 Take Foot Out
- 5.8 Put Foot In
- 5.9 BCS Lamp On
- 5.10 Broken Cable
- 5.11 Platform Level
- 5.12 Platform Overload
- 5.13 Capacity Mode Error
- 5.14 Swing DTCs
- 5.15 Jib Unlocked
- 5.16 Jib Locked
- 5.17 Chassis Status
- 5.18 Machine Tilted Mode
- 5.19 Envelope Status
- 5.20 Machine Model Unknown
- Section 6. EMERGENCY PROCEDURES
- Section 7. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
- Section 8. INSPECTION AND REPAIR LOG
SECTION 3 - MACHINE CONTROLS AND INDICATORS
3121618 – JLG Lift – 3-17
Platform Control Indicator Panel
(See Figure 3-4., Platform Control Indicator Panel)
1. Level System Fault Indicator
Indicates a fault in the electronic leveling
system. The fault indicator will flash and
an alarm sound. All functions will default
to creep if the boom is out of transport
mode.
IF THE LEVEL SYSTEM FAULT INDICATOR IS ILLUMINATED, SHUT DOWN THE
MACHINE, RESET THE EMERGENCY STOP, AND RESTART THE MACHINE. IF THE FAULT
PERSISTS, RETURN THE PLATFORM TO THE STOWED POSITION, USING MANUAL LEV-
ELING AS REQUIRED, AND HAVE LEVELING SYSTEM REPAIRED.
2. AC Generator (If Equipped)
Indicates the generator is in operation.
3. Platform Overload Indicator (If Equipped)
Indicates the platform has been over-
loaded.
4. Platform Capacity Indicator
Indicates the maximum platform capacity
selected for the platform.
One of the capacity lights should be on at
all times. Both lights will flash and an
alarm will sound if the platform is out of
the operating envelope for the selected
capacity.