Operator Manual Manual

Section 5 - Attachments and Hitches

5-24 31200743

Bucket

Use Appropriate Bucket Capacity Chart

To determine maximum capacity, refer to “Telehandler/

Attachment/Fork Capacity” on page 5-4.

The joystick (1) controls lift/lower and the extend/retract movement of the boom.

The tilt button (2) enables bucket tilt.

• While pressing and holding button move joystick left to tilt up.

• While pressing and holding button move joystick right to tilt down.

Installation Procedure:

• Refer to “Attachment Installation” on page 5-9.

Operation:

• Raise or lower boom to appropriate height for loading material from stockpile.

• Align telehandler with face of stockpile and drive slowly and smoothly into pile to

load bucket.

• Tilt bucket up far enough to retain load and back away from pile.

• Travel in accordance with requirements set forth in Section 1 - General Safety

Practices.

• Tilt bucket down to dump load.

OZ0730

OAL1611