Operator Manual Manual

Section 7 - Lubrication and Maintenance

7-1131200743

Hydraulic Oil

A. Hydraulic Oil Level Check

1. Perform “Shut-Down Procedure” on page 4-3.

2. Check level of hydraulic oil at the sight gauge (5) on the frame. The oil level

should be visible in the gauge window.

3. If hydraulic oil is low, remove oil fill cap (6) from filler neck. Add hydraulic fluid to

bring oil up to the upper mark on the sight gauge.

4. Replace hydraulic oil fill cap.

OW0970

OW1030

OAH2170