Operator Manual Manual

Section 3 - Controls and Indicators

3-2131200743

3.4 OPERATOR SEAT

Operator Presence (CE & AUS)

The operator seat (1) is equipped with an operator presence switch. If the switch

detects a loss of pressure during operation, after a two second delay one of the

following will occur:

1. With the park brake (2) disengaged and the transmission in neutral (3):

• Horn sounds continuously.

• Upon returning to seated position, horn will cease.

2. With the park brake (2) disengaged and transmission in forward or reverse (3):

• Horn sounds continuously, transmission shifts to neutral and boom joystick

(4) is disabled.

• Upon returning to seated position, horn will cease and boom joystick is

enabled. Return transmission to neutral to allow system to reset prior to

reengaging forward or reverse travel.

OAL3850