Operator Manual Manual

Section 5 - Attachments and Hitches

5-18 31200743

Carriage with Forks

Use Carriage Attachment Capacity Chart

To determine maximum capacity, refer to “Telehandler/

Attachment/Fork Capacity” on page 5-4.

The joystick (1) controls lift/lower and the extend/retract movement of the boom.

The tilt button (2) enables fork tilt.

• While pressing and holding button move joystick left to tilt up.

• While pressing and holding button move joystick right to tilt down.

Installation Procedure:

• Refer to “Attachment Installation” on page 5-9.

Equipment Damage Precautions:

• Do not use forks as a lever to pry material. Excessive prying forces could

damage forks or machine structure.

• Do not attempt to lift loads that are attached or connected to another object.

OY0690

OAL1601