Parts Manual Instruction Manual

1-4 3120676
SECTION 1 FRAME
S
E
C
T
I
O
N
1
F
R
A
M
E
65 2780153 Hub 2
66 0440112 Cup, Bearing 4
67 0440113 Cone, Bearing 4
68 3960373 Seal, Oil 2
69 3312205 Nut 3/4”-10NC 6
70 Not Used
71 0642224 Bolt 3/4”-10NC x 3” 4
72 Not Used
73 2160002 Fitting, Grease 2
74 3323003 Nut, Slotted 1 1/4”-12NF 2
75 3450609 Pin, Cotter 3/16” x 2 1/4” 2
76 2160001 Fitting, Grease 4
77 4740156 Washer, Thrust 2
TIRE AND WHEEL INSTALLATIONS
0253132 8.75” x 16.75” Pneumatic Ref.

0253133 8.75” x 16.5” Foam-Filled Ref.

0251499 9.50” x 16.5” Pneumatic Ref.

101 0253130 Tire & Wheel Assembly - Pneumatic - 8.75”-16.5” (Front) 2
4520199 Tire - 8.75”-16.5” (Galaxy) 2
0253131 Tire & Wheel Assembly - Foam-Filled - 8.75”-16.5” (Front) 2
0239396 Tire & Wheel Assembly - Pneumatic - 9.5”-16.5” (Front) 2
4520110 Tire - 9.5”-16.5” (General Jumbo GLT) 2
102 0253130 Tire & Wheel Assembly - Pneumatic - 8.75”-16.5” (Rear) 2
4520199 Tire - 8.75”-16.5” (Galaxy) 2
0253131 Tire & Wheel Assembly - Foam-Filled - 8.75”-16.5” (Rear) 2
0239397 Tire & Wheel Assembly - Pneumatic - 9.5”-16.5” (Rear) 2
4520111 Tire - 9.5”-16.5” (General GLT Traction ll) 2
Note: Assemblies may require ballast/foam filling to
manufacturer’s specifications prior to installing on a
machine. Refer to Operation & Safety or Service &
Maintenance Manuals. Purchase individual tire and/or
rim only if able to foam fill tire & wheel assembly, oth-
erwise, purchase complete assembly.
Ref.
103 4842994 Rim (9.5”-16.5”) 4
104 4842561 Rim (8.75”-16.5”) 4
105 4640392 Valve 4
FIGURE 1-1. FRAME, STEERING & DRIVE COMPONENTS, ASSEMBLIES & INSTALLATIONS -
FIXED & OSCILLATING AXLES (STANDARD 2WD - DOUBLE ACTING STEER CYLINDER)
(CONTINUED)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.