Parts Manual Instruction Manual

3120676 1-7
S
E
C
T
I
O
N
1
F
R
A
M
E
SECTION 1 FRAME
.
FIGURE 1-2. FRAME, STEERING & DRIVE COMPONENTS, ASSEMBLIES & INSTALLATIONS -
FIXED & OSCILLATING AXLES (OPTIONAL 2WD - SINGLE ACTING STEER CYLINDER)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
FRAME WELDMENT OPTIONS: Ref.
2360283 Frame Weldment (5’-9” With Oscillating Axle & Standard
Platform)
1
2360288 Frame Weldment (5’-9” With Fixed Axle & Standard Platform) 1
2360321 Frame Weldment (5’-9” With Oscillating Axle & Low Mount
Platform)
1
2360322 Frame Weldment (5’-9” With Fixed Axle & Low Mount Plat-
form)
1
2360330 Frame Weldment (6’-6” With 12 x 16.5 Tire Option & Oscillat-
ing Axle)
1
0251475 Frame Weldment (6’-6” With 12 x 16.5 Tire Option & Fixed
Axle)
1
AXLE INSTALLATION OPTIONS: Ref.
0239196 Oscillating Axle - 5’-9” MACHINES (Optional - When
Equipped)
Ref. B
0251246 Oscillating Axle - 6’-6” MACHINES (Optional - When
Equipped)
Ref. C
0251487 Fixed Axle - 6’-6” MACHINES (12” x 16.5” Tires) Ref. A
1 Axle Options: 1
4843094 5’-9” Machines
4843728 6’-6” Machines
2 1681785 Lockout Cylinder Assembly - Oscillating Axle Only (See
Section 5 for Breakdown)
2
3 Hardware Options: 1
4300034 Stud (Welded on Part) (5’-9” Machines Only)
0641610 Bolt 3/8”-16NC x 1 1/4” (6’-6” Machines Only)
4 Hardware Options: 1
4751600 Flatwasher 3/8” (5’-9” Machines Only)
4740185 Flatwasher 3/8” (Hardened) (6’-6” Machines Only)
5 4761600 Lockwasher 3/8” 1
6 Top Weldment, Pin Options: 2
4842622 5’-9” Machines
4842794 6’-6” Machines
7 2160002 Fitting, Grease 1
8 4842621 Weldment, Pin 1
9 0641406 Bolt 1/4”-20NC x 3/4” (Oscillating Axle Only) 4
10 4761400 Lockwasher 1/4” (Oscillating Axle Only) 4
11 Bottom Weldment, Pin Options: (Oscillating Axle Only) 2
4842794 5’-9” Machines
4843286 6’-6” Machines
12 3311601 Nut 3/8”-16NC (5’-9” Machines Only) 1
13 Not Used
14 4751400 Flatwasher 1/4” (Oscillating Axle Only) 4