Operator Manual Manual

Section 5 - Attachments
5-2731200938
Quick Attach Mounted Hook
Use Quick Attach Mounted Hook Capacity Chart
To determine maximum capacity, refer to “Telehandler/Attachment/
Fork Capacity” on page 5-4.
Suspend loads in accordance with requirements set forth in Section 1 - General
Safety Practices.
The joystick (1) controls movement of the boom.
The attachment tilt roller switch (2) controls quick attach mounted hook tilt.
• Push roller switch down to tilt up.
• Push roller switch up to tilt down.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-10.
Operation:
• Weight of rigging must be included as part of total load being lifted.
OAL1510
O 3760Z
1
2