Operator Manual Manual

Section 7 - Lubrication and Maintenance
7-20 31200938
Cab Air Filters (if equipped)
A. Cab Air Filters Check
1. Perform “Shut-Down Procedure” on page 4-3.
2. Remove two thumb screws (1) and panel (2) from front of cab.
3. Remove filter thumb screw (3) and filter (4).
4. If filter is not damaged, clean and place back under dash. If damaged, replace filter.
5. Secure filter with thumb screw.
6. Replace panel on front of cab and secure with thumb screws.
50
OW0980
OAM3670
OZ4050
1
1
2
3
4