Operator Manual Manual

Section 2 - Pre-Operation and Inspection
2-731200938
2. Front Axle - Steer cylinders undamaged, not leaking; pivot pins secure (if equipped);
hydraulic hoses undamaged, not leaking.
3. Left Outrigger
- Pins secure; hydraulic hoses and cylinder undamaged, not leaking.
4. Wheel/Tire Assembly
- Properly inflated and secured; no loose or missing lug nuts.
Inspect for worn tread, cuts, tears or other discrepancies.
5. Mirror
- Clean and undamaged.
6. Cab and Electrical
-
• General appearance; no visible damage.
• Frame level indicator(s) and window glass undamaged and clean.
• Gauges, switches, joystick, foot controls and horn operational.
• Check seat belt for damage, replace belt if frayed or cut webbing, damaged
buckles or loose mounting hardware.
7. Wheel Chock
(if equipped) - See inspection note.
8. Wheel/Tire Assembly
- Properly inflated and secured; no loose or missing lug nuts.
Inspect for worn tread, cuts, tears or other discrepancies.
9. LSI Sensor
- See inspection note.
10. Main Control Valve
- See inspection note.
11. Rear Axle
- Steer cylinders undamaged, not leaking; pivot pins secure; hydraulic
hoses undamaged, not leaking.
12. Wheel/Tire Assembly
- Properly inflated and secured; no loose or missing lug nuts.
Inspect for worn tread, cuts, tears or other discrepancies.
13. Engine Compartment
-
• Drive belts, check condition and replace as required.
• Engine mounts - See inspection note.
• Battery cables tight, no visible damage or corrosion.
• Engine cover properly secured.
14. Mirrors
- Clean and undamaged.
15. Wheel/Tire Assembly
- Properly inflated and secured; no loose or missing lug nuts.
Inspect for worn tread, cuts, tears or other discrepancies.
16. Frame Level Cylinder
- Pins secure; hydraulic hoses undamaged, not leaking.
17. Right Outrigger
- Pins secure; hydraulic hoses and cylinder undamaged, not leaking.
18. Attachment
- Properly installed, see “Attachment Installation” on page 5-10.
19. Front Lights
(if equipped) - Clean and undamaged.
20. Rear Lights
(if equipped) - Clean and undamaged. For road use, orientate in the
horizontal position. For off-road use, orientate in the horizontal or down position.
See “Road Operation (CE)” on page 4-10.