Parts Manual User guide

3121134 3394RT & 4394RT 2-41
SECTION 2 GROUND CONTROLS
FIGURE 2-8. GENERATOR INSTALLATION (GM ENGINE OPTIONS)
ITEM # PART NUMBER QTY. DESCRIPTION REV.
0275141 Ref 110V GENERATOR INSTALLATION (GM ENGINE OPTION) C
1 0100011 AR Locking, Compound
2 0480143 1 Belt, Serpentine
3 1 Bolt Options:
0641514 Bolt 5/16-18NC x 1-3/4 (Prior to SN 0200151212)
0641510 Bolt 5/16-18NC x 1-1/4 (SN 0200151212 to SN 0200191606)
4 0641710 2 Bolt 7/16-14NC x 1-1/4
5 0700820 1 Bolt Metric 8 x 60mm
6 0701016 1 Bolt Metric 10 x 40mm
7 2460059 1 Generator & Control Box Assembly
7A 2460049 1 Generator Assembly
Ref Note: Replacement Generator comes with a 3 1/2 Dia.
pulley standard, must be changed to p/n 3580324 - 3
pulley (Item 7D) to operate correctly.
70000122 1 Armature
7020108 4 Brushes
7020109 4 Holder, Brush
7012513 4 Cap, Brush Holder
7012514 1 Fan
7020110 1 Bell, Front
7020111 1 Bell, Rear
7020190 2 Bearing
7B 70002241 1 Box, Control Assembly
Ref Note: Replacement 110V Control Box comes with 2 Stan-
dard Receptacles p/n 4460190. Optional Industrial Twist
Lock Receptacles p/n 4460027 must be ordered separately.
70002240 1 Breaker, Circuit
2420203 1 Voltmeter
2 Receptacle Options:
4460190 Standard Receptacle
4460027 Twist-Lock Receptacle
70002237 1 Diode
3520028 1 Plug
7C 7026525 1 Regulator, Voltage
7D 3580324 1 Pulley
8 0641606 2 Bolt 3/8-16NC x 3/4
9 3311505 1 Locknut 5/16 x 18NC (Prior to SN 0200151212)
10 3580312 1 Pulley, Idler
11 3580348 1 Pulley, Belt Tensioner
12 4568735 1 Tube, Spacer
13 0721006 7 Screw #10-24NC x 3/4
14 0902842 1 Bracket, Generator Box Mounting
15 4751500 AR Flatwasher 5/16 Wide
16 1061006 1 Cable, AC (See ELECTRICAL SECTION for Breakdown)
17 4811900 1 Flatwasher 8mm
18 4891600 1 Flatwasher 3/8 Hardened
19 3311001 7 Nut #10-24NC
20 3311605 2 Locknut 3/8-16NC
21 to 22 Not Used