Parts Manual User Manual

3120750 7-27
SECTION 7 ELECTRICAL
S
E
C
T
I
O
N
7
E
L
E
C
T
R
I
C
A
L
571 Seal, Terminal (14-16 Ga.) 1
Not Required Deutz Engine Machines
4460458 Isuzu Engine Machines
4460789 Seal, Terminal (10-12 Ga.) 2
Not Required Ford Engine Machines
572 Connector - 3 Position 1
Not Required Deutz Engine Machines
4460459 Isuzu Engine Machines
Not Required Ford Engine Machines
573 4460457 Socket, Female (14-16 Ga.) 1
Not Required Deutz Engine Machines
4460457 Isuzu Engine Machines
Not Required Ford Engine Machines
574 4460449 DIN Connector without Diode (Prior to S/N 44253
Only)
1
575 Housing, Terminal 1
4460777 Deutz Engine Machines
4460777 Isuzu Engine Machines
Not Required Ford Engine Machines
Note: Items 576-583 used on Ford Engine Machines
Only.
Ref.
576 4460713 Connector - 42 Position (S/N 46089 to Present) 1
577 4460725 Lock, Wedge (Center) (S/N 46089 to Present) 1
4460726 Lock, Wedge (Right) (S/N 46089 to Present) 1
578 4460800 Plug, Hole (S/N 46089 to Present) 27
579 4460799 Pin, Male 16-18GA (S/N 46089 to Present) 9
4460728 Pin, Male 12-14GA (S/N 46089 to Present) 4
580 2400061 Fuse (Not Shown - S/N 46089 to Present) 2
581 2400060 Holder, Fuse (Not Shown - S/N 46089 to Present) 2
582 Not Used
583 4460742 Connector, Male - 2 Position (S/N 51983 to Present) 1
STANDARD HARNESS COMPONENTS Ref.
601 Not Available Tilt Indicator Harness 1
601A 4460268 Socket, Female 6
601B 4460224 Connector, Female - 6 Position 1
602 Not Available Throttle Actuator/Controller Harness (Deutz & Isuzu) 1
Use 2910000 Throttle Actuator & Controller Assembly (Was p/n
0060033)
1
7008833 Mounting Clamp Kit (Not Shown) 1
7008836 Spring, Retract (Not Shown) 1
602A Not Available Throttle Actuator & Harness (Purchase p/n
2910000)
1
7016336 Boot Kit 1
602B Not Serviced Pin, Male 9
602C Not Serviced Connector, Male 1
602D 2910001 Controller & Harnesses (Purchase p/n 2910000) 1
602E Not Serviced Socket, Female 9
FIGURE 7-6. HARNESS COMPONENTS INSTALLATION
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.