Parts Manual User Manual

7-30 3120750
SECTION 7 ELECTRICAL
S
E
C
T
I
O
N
7
E
L
E
C
T
R
I
C
A
L
707 4922432 Harness - Generator Timer to Relay (S/N 56107
to Present) (Not Shown - Located in Ground
Control Box)
1
708 4921827 Generator to Rear of Boom Harness (110V) 1
4921954 Generator to Rear of Boom Harness (220V) 1
Note: Harness used to connect AC at platform har-
ness to generator receptacle to power platform
receptacle.
1060494 Cable, Electrical - 12/3
26ft/8m
708A 4460205 Plug, Male (110V) 1
4460233 Plug, Male (220V) 1
708B 4460134 Receptacle, Female (110V) 1
4460701 Receptacle, Female (220V) 1
709 2920140 Platform Worklights Harness (Includes Light and
Wire Only)
2
2820035 Loom, Vinyl
9ft/2.8m
709A 4460598 Connector, Strain Relief 1
4460442 Terminal (Not Shown-Located in Platform Con-
sole)
2
710 4922140 2WD/4WD Valve Harness Assembly 1
710A 4460499 Din Connector with Diode 3
711 Not Available Lights Harness 1
1060341 Cable, Electrical - 16/2
37ft/11.3m
712 to 714A Not Required
TOOLS Ref.
4921850 Service Harness (For setting Deutz Throttle Actuator) 1
801 7002821 Crimper (For Wire to Pin/Socket Connections) 1
802 7002823 Extractor (For Removal of Pin/Socket from Connec-
tors)
1
803 4460467 Extractor, Pin (Blue 16-18 Gauge) (For Removal of
Pin/Socket from Connectors)
1
4460510 Extractor, Pin (Yellow 12-14 Gauge) (For Removal of
Pin/Socket from Connectors)
1
804 7002828 Stripper, Wire 1
FIGURE 7-6. HARNESS COMPONENTS INSTALLATION
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.