Parts Manual Owner manual
Table Of Contents
- SECTION 1 FRAME
- FIGURE 1-1. AXLE AND STEERING INSTALLATION - 2WD WITHOUT TOW BAR
- FIGURE 1-2. AXLE AND STEERING INSTALLATION - 2WD WITH TOW BAR (S/N 49971 TO PRESENT)
- FIGURE 1-3. AXLE AND STEERING INSTALLATION - 4WD.
- FIGURE 1-4. TIRE AND WHEEL DRIVE INSTALLATIONS
- FIGURE 1-5. DRIVE BRAKE ASSEMBLY.
- FIGURE 1-6. DRIVE HUB ASSEMBLY (PRIOR TO S/N 39594).
- FIGURE 1-7. DRIVE HUB ASSEMBLY (S/N 39594 TO PRESENT)
- FIGURE 1-8. DRIVE MOTOR ASSEMBLY - REAR
- FIGURE 1-9. DRIVE MOTOR ASSEMBLY - FRONT
- FIGURE 1-10. DRIVE VALVES INSTALLATIONS
- FIGURE 1-11. TOW BAR INSTALLATION - 2WD
- FIGURE 1-12. SEMI-TRACK INSTALLATION
- SECTION 2 TURNTABLE
- FIGURE 2-1. CONTROL VALVES INSTALLATIONS
- FIGURE 2-2. MAIN CONTROL VALVE ASSEMBLY - PROPORTIONAL
- FIGURE 2-3. TURNTABLE AND SWING DRIVE INSTALLATIONS
- FIGURE 2-4. SWING MOTOR ASSEMBLY
- FIGURE 2-5. SWING BEARING ASSEMBLY
- FIGURE 2-6. DEUTZ ENGINE INSTALLATION
- FIGURE 2-7. GENERATOR INSTALLATION - DEUTZ MACHINES (OPTIONAL)
- FIGURE 2-8. PISTON PUMP ASSEMBLY
- FIGURE 2-9. TANK INSTALLATIONS
- FIGURE 2-10. GROUND CONTROL BOX ASSEMBLY
- FIGURE 2-11. ELECTRICAL OPTIONS INSTALLATION (TURNTABLE MOUNTED)
- FIGURE 2-12. HOODS INSTALLATION
- SECTION 3 BOOM
- SECTION 4 PLATFORM
- FIGURE 4-1. PLATFORM INSTALLATION
- FIGURE 4-2. PLATFORM CONSOLE ASSEMBLY
- FIGURE 4-3. CONTROLLER ASSEMBLY (LIFT & SWING) (PRIOR TO S/N39857)
- FIGURE 4-4. CONTROLLER ASSEMBLY (LIFT & SWING) (S/N39857 TO PRESENT)
- FIGURE 4-5. CONTROLLER ASSEMBLY (DRIVE & STEER) (PRIOR TO S/N39857)
- FIGURE 4-6. CONTROLLER ASSEMBLY (DRIVE & STEER) (S/N39857 TO PRESENT)
- FIGURE 4-7. CONTROLLER ASSEMBLY (SPEED)
- FIGURE 4-8. SOFT TOUCH SYSTEM INSTALLATION (S/N 49601 TO PRESENT)
- SECTION 5 CYLINDER
- FIGURE 5-1. AXLE LOCKOUT CYLINDER ASSEMBLY
- FIGURE 5-2. PLATFORM LEVEL CYLINDER ASSEMBLY
- FIGURE 5-3. LIFT CYLINDER ASSEMBLY - JIB (450AJ ONLY)
- FIGURE 5-4. LIFT CYLINDER ASSEMBLY - MAIN
- FIGURE 5-5. LIFT CYLINDER ASSEMBLY - MID
- FIGURE 5-6. LIFT CYLINDER ASSEMBLY - TOWER
- FIGURE 5-7. ROTATOR CYLINDER ASSEMBLY - PLATFORM
- FIGURE 5-8. STEER CYLINDER ASSEMBLY
- FIGURE 5-9. TELESCOPE CYLINDER ASSEMBLY
- SECTION 6 HYDRAULIC
- SECTION 7 ELECTRICAL
- SECTION 8 DECALS
- SECTION 9 RECOMMENDED SERVICE PARTS STOCK
- SECTION 10 SPECIAL OPTIONS
3120870 4-19
SECTION 4 PLATFORM
S
E
C
T
I
O
N
4
P
L
A
T
F
O
R
M
FIGURE 4-5. CONTROLLER ASSEMBLY (DRIVE & STEER) (PRIOR TO S/N39857)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
Note: use p/n 1600287 when replacing complete con-
troller
1600270 CONTROLLER ASSEMBLY Ref. A
1 Not Available Handle Assembly 1
1A 7019126 Halves, Handle (Includes Both Halves & Hard-
ware)
1
1B 7019127 Boot, Switch 1
1C 7003981 Rocker 1
1D 7003982 Switch, Micro 1
2 7003984 Coupling 1
3 7003966 Boot 1
4 7003938 Clamp, Boot (Not Shown) 1
5 7003957 Ring, Retaining 1
6 7003967 Flatwasher 1
7 7003968 Detent Assembly 1
8 7003969 Screw 2
7003941 Washer 2
9 7003933 Gasket 1
10 7003950 Plate, Base 1
11 7019103 Pin 1
12 7019105 Shaft/Gear Assembly 1
13 7019125 Micro Cam Assembly (Includes Items 14-25) 1
14 Not Serviced Screw 1
15 Not Serviced Cam, 4 Hole 1
16 Not Serviced Cam, 4 Hole 1
17 Not Serviced Cam, 4 Hole 1
18 Not Serviced Cam, 4 Hole 1
19 Not Serviced Spacer, Cam 1
20 Not Serviced Spacer, Cam 1
21 Not Serviced Plate, Cam - Left Side 1
22 Not Serviced Coupling, Cam 1
23 Not Serviced Spacer, Cam 1
24 Not Serviced Coupling, Cam 1
25 Not Serviced Spacer, Cam 1
26 7003994 Screw 4
Not Serviced Washer 4
27 7019106 Screw 2
28 7003961 Microswitch 1
29 7019107 Insulator 1
30 7019108 Insulator, Black 1
31 7019109 Nut, Tinnerman (Not Shown - Use with #27) 2
32 7003946 Spring, Return 1
33 7019110 Spacer 1
34 7019111 Bearing 1
35 7019112 Washer, Cam Retainer 1
36 7003935 Gear, Slave 1