Parts Manual Owner manual
Table Of Contents
- SECTION 1 FRAME
- FIGURE 1-1. AXLE AND STEERING INSTALLATION - 2WD WITHOUT TOW BAR
- FIGURE 1-2. AXLE AND STEERING INSTALLATION - 2WD WITH TOW BAR (S/N 49971 TO PRESENT)
- FIGURE 1-3. AXLE AND STEERING INSTALLATION - 4WD.
- FIGURE 1-4. TIRE AND WHEEL DRIVE INSTALLATIONS
- FIGURE 1-5. DRIVE BRAKE ASSEMBLY.
- FIGURE 1-6. DRIVE HUB ASSEMBLY (PRIOR TO S/N 39594).
- FIGURE 1-7. DRIVE HUB ASSEMBLY (S/N 39594 TO PRESENT)
- FIGURE 1-8. DRIVE MOTOR ASSEMBLY - REAR
- FIGURE 1-9. DRIVE MOTOR ASSEMBLY - FRONT
- FIGURE 1-10. DRIVE VALVES INSTALLATIONS
- FIGURE 1-11. TOW BAR INSTALLATION - 2WD
- FIGURE 1-12. SEMI-TRACK INSTALLATION
- SECTION 2 TURNTABLE
- FIGURE 2-1. CONTROL VALVES INSTALLATIONS
- FIGURE 2-2. MAIN CONTROL VALVE ASSEMBLY - PROPORTIONAL
- FIGURE 2-3. TURNTABLE AND SWING DRIVE INSTALLATIONS
- FIGURE 2-4. SWING MOTOR ASSEMBLY
- FIGURE 2-5. SWING BEARING ASSEMBLY
- FIGURE 2-6. DEUTZ ENGINE INSTALLATION
- FIGURE 2-7. GENERATOR INSTALLATION - DEUTZ MACHINES (OPTIONAL)
- FIGURE 2-8. PISTON PUMP ASSEMBLY
- FIGURE 2-9. TANK INSTALLATIONS
- FIGURE 2-10. GROUND CONTROL BOX ASSEMBLY
- FIGURE 2-11. ELECTRICAL OPTIONS INSTALLATION (TURNTABLE MOUNTED)
- FIGURE 2-12. HOODS INSTALLATION
- SECTION 3 BOOM
- SECTION 4 PLATFORM
- FIGURE 4-1. PLATFORM INSTALLATION
- FIGURE 4-2. PLATFORM CONSOLE ASSEMBLY
- FIGURE 4-3. CONTROLLER ASSEMBLY (LIFT & SWING) (PRIOR TO S/N39857)
- FIGURE 4-4. CONTROLLER ASSEMBLY (LIFT & SWING) (S/N39857 TO PRESENT)
- FIGURE 4-5. CONTROLLER ASSEMBLY (DRIVE & STEER) (PRIOR TO S/N39857)
- FIGURE 4-6. CONTROLLER ASSEMBLY (DRIVE & STEER) (S/N39857 TO PRESENT)
- FIGURE 4-7. CONTROLLER ASSEMBLY (SPEED)
- FIGURE 4-8. SOFT TOUCH SYSTEM INSTALLATION (S/N 49601 TO PRESENT)
- SECTION 5 CYLINDER
- FIGURE 5-1. AXLE LOCKOUT CYLINDER ASSEMBLY
- FIGURE 5-2. PLATFORM LEVEL CYLINDER ASSEMBLY
- FIGURE 5-3. LIFT CYLINDER ASSEMBLY - JIB (450AJ ONLY)
- FIGURE 5-4. LIFT CYLINDER ASSEMBLY - MAIN
- FIGURE 5-5. LIFT CYLINDER ASSEMBLY - MID
- FIGURE 5-6. LIFT CYLINDER ASSEMBLY - TOWER
- FIGURE 5-7. ROTATOR CYLINDER ASSEMBLY - PLATFORM
- FIGURE 5-8. STEER CYLINDER ASSEMBLY
- FIGURE 5-9. TELESCOPE CYLINDER ASSEMBLY
- SECTION 6 HYDRAULIC
- SECTION 7 ELECTRICAL
- SECTION 8 DECALS
- SECTION 9 RECOMMENDED SERVICE PARTS STOCK
- SECTION 10 SPECIAL OPTIONS
7-14 3120870
SECTION 7 ELECTRICAL
S
E
C
T
I
O
N
7
E
L
E
C
T
R
I
C
A
L
602G Not Available Connector - 4 Position 1
4460693 Pin, Male 4
4460591 Clip 1
4460608 Seal, Terminal 4
603 Not Available Sunstrand Pump Harness 1
603A 7007497 Plug (Pump End) 1
603B 7007498 Plug (Engine Harness End) 1
604 Not Available Controller Harness Assembly (Lift and Swing) 1
604A 4460266 Connector, Female - 9 Position 1
4460267 Pin, Male 9
604B Not Available Connector, Male - 4 Position 2
Not Available Pin, Male 8
604C Not Available Connector, Female - 4 Position 2
Not Available Socket, Female 8
604C Not Available Connector, Female - 3 Position 2
Not Available Socket, Female 6
605 7019124 Controller Harness/Circuit Board Assembly (Drive
and Steer)
1
605A 4460265 Connector - 9 Position 1
4460268 Socket, Female 9
606 Not Required
607 Not Available Speed Controller Harness Assembly 1
607A 4460265 Connector - 9 Position 1
4460267 Pin, Male 9
608 4360464 Proximity Switch and Harness Assembly (Harness
Not Sold Separately)
1
609 4922197 Proximity Switch Relay and Harness Assembly
(Harness Not Sold Separately/See Section 4 for
Relay Components)
1
610 Not Available Limit Switch Harness Assembly 1
1060341 Cable, Electrical 16/2
66ft/20.1m
611 to 611E Not Required
612 to 612B Not Required
613 to 613A Not Required
OPTIONAL HARNESS COMPONENTS Ref.
701 Not Used
702 4921927 Articulating Jib Valve Harness Options (450AJ Only)
702A 4460326 Connector - 3 Position 1
702B 4460267 Pin, Male 3
702C 4460449 DIN Connector without Diode 2
703 Not Available Alarm Harness 1
703A 4460424 Connector - 2 Position 1
703B 4460268 Socket, Female 2
704 Not Available Strobe Light Harness 1
704A 4460320 Connector, Female - 2 Position 1
704B 4460267 Pin, Male 2
705 0258304 AC to Platform Receptacle Components Ref. 3
FIGURE 7-3. HARNESS COMPONENTS INSTALLATION
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.