Parts Manual Owner manual

3121236 400S 460SJ 7-37
SECTION 7 ELECTRICAL
704 Ref 7500W SkyPower Generator Junction Box Components
0861542 Ref
60Hz Spec
D
0861567 Ref
50Hz Specs
B
704A 2ft/.6m Cable, Electrical 12/3
1060494
60Hz Spec
See Note
50Hz Spec (Note: Not Available - Purchase Locally)
704B
2.5ft/.76m
Cable, Electrical 10/3
1060708
60Hz Spec
See Note
50Hz Spec (Note: Not Available - Purchase Locally)
704C 1060343 1.5ft/.46m Cable, Electrical 10/4 (60Hz Spec Only)
704D 4460425 2 Connector, Strain Relief
704E AR Component Options:
4460426 2 Connector, Strain Relief (60Hz Spec Only)
4460426 1 Connector, Strain Relief (50Hz Spec Only)
3520189 1 Plug (50Hz Spec Only)
704F 1671092 1 Cover (60Hz Spec Only)
4460963 1 Connector (60Hz Spec Only)
705 Ref 7500W Generator Electrical Diagram Components Options:
1001112586 Ref Caterpillar, Deutz & Perkins Engine Machines A
4933349 Ref Gm Engine Machines B
705A 1 Generator Harness Options:
1001112587 Caterpillar, Deutz & Perkins Engine Machines A
4923420 Gm Engine Machines A
705B 4460374 2 Plug, Sealed Relay
4460375 7 Terminal
705C 4460967 1 Plug, Male - 3 Position
4460465 3 Socket, Female
705D 2400060 1 Fuseholder
2400064 1 Fuse - 5 Amp
705E 4922641 1 Switch Harness
705F 4460742 1 Connector - 2 Position (Caterpillar, Deutz & Perkins
Engines)
4460743 2 Socket, Female (Caterpillar, Deutz & Perkins Engines)
4460458 2 Seal, Wire (Caterpillar, Deutz & Perkins Engines)
706 0255917 1 Strobe Light Harness (Includes Strobe Light) C
706A 4460320 1 Connector, Female - 2 Position
4460267 2 Pin, Male
707 See Note 1 Lights Harness (Note: Not Available for Purchase)
1060341
37ft/11.3m
Cable, Electrical - 16/2
707A 3740049 1 Relay
4922643 1 Harness, Bag (Located at Ground Control Box) (Not Shown)
708 AR Platform Worklights Components
708A 1 Harness, Console Box to Aux Relay Options:
1060983 400S (63ft/19.2m of 12/3 Cable P/N 1060494)
4922965 460SJ (69ft/21m of 12/3 Cable P/N 1060494)
708B 2920140 2 Platform Worklights External Harness (Includes Light & Wire
Only)
708C 4460426 1 Connector, Strain Relief
FIGURE 7-3. HARNESS COMPONENTS INSTALLATION (MACHINES WITH UGM) (SN
0300069000 TO SN 0300177683) (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.