Parts Manual Manual

3120841 4-3
SECTION 4 PLATFORM
S
E
C
T
I
O
N
4
P
L
A
T
F
O
R
M
FIGURE 4-1. PLATFORM COMPONENTS INSTALLATION (FRONT ENTRY)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
PLATFORM OPTIONS: Ref.
3510751 5ft/1.52m Platform - With Self-Closing Gate
(EN280 & CE Specs)
Ref. 2
3510728 5ft/1.52m Platform - With Self-Closing Gate
(Australian Spec)
Ref. 3
3510499 6ft/1.83m Platform - With Drop Bar
(EN280 & CE Specs)
Ref. 3/A
3510763 6ft/1.83m Platform - With Drop Bar
(Mesh to Mid Rail) (EN280 & CE Specs)
Ref. 1/A
3510537 6ft/1.83m Platform - With Self-Closing Gate
(EN280 Spec)
Ref. 2
3510542 6ft/1.83m Platform - (Australian Spec) Ref. 3
3510500 8ft/2.44m Platform - With Drop Bar
(EN280 & CE Specs)
Ref. 2/A
3510764 8ft/2.44m Platform - With Drop Bar
(Mesh to Mid Rail) (EN280 & CE Specs)
Ref. 1/A
3510538 8ft/2.44m Platform - With Self-Closing Gate
(EN280 Spec)
Ref. 2
3510543 8ft/2.44m Platform - (Australian Spec) Ref. 3
PLATFORM ASSEMBLY (STANDARD PARTS) Ref.
1 to 3 Not Used
4 Rail Weldment - Back Options: 1
4844927 Prior to S/N 0300026233
4845328 S/N 0300026233 to S/N 0300069000
5Not Used
6 3900207 Fastener A/R
Note: P/N 3900207 Fastener may be replaced with
p/n 0641416 bolt, p/n 4751400 flatwasher, p/n
3311405 locknut and p/n 3300151 acorn type nut.
Acorn type nut required to meet industry safety
requirements.
Ref.
7 3300393 Collar A/R
8 3520072 Plug, Cap 4
9 to 13 Not Used
14 0641524 Bolt 5/16in-18NC x 3in 4
15 3311505 Locknut 5/16in-18NC 4
16 4751500 Flatwasher 5/16in Regular 4
17 2080040 Fastener A/R
7016652 Fastener Tool (Small Fasteners Only) 1
PLATFORM ASSEMBLIES - WITH DROP BAR
(VARIABLE PARTS)
Ref.
51 Floor Weldment Options: 1
4846184 5ft/1.52m Platforms
4845290 6ft/1.83m Platforms
4845289 8ft/2.44m Platforms