Parts Manual Manual

3120841 4-15
SECTION 4 PLATFORM
S
E
C
T
I
O
N
4
P
L
A
T
F
O
R
M
ELECTRICAL COMPONENTS INSTALLATIONS: Ref.
0860986 2WD CE & EN280 Spec (Prior to S/N 0300035129) Ref. 7/F
0861084 2WD Australian Spec (Prior to S/N 0300035129) Ref. 1/A
0861048 4WD CE & EN280 Spec (Prior to S/N 0300035129) Ref. 7/F
0861083 2WD Australian Spec (Prior to S/N 0300035129) Ref. 1/A
4921994 CE & EN280 Spec (S/N 0300035129 to
S/N 0300064249)
Ref. 2/E
4921991 Australian Spec (S/N 0300035129 to
S/N 0300064249)
Ref. 1/A
(Note: Prior to S/N 0300035129 the following com-
ponents are part of the console assembly. After S/N
35129, parts are available as a harness which is
part of the console assembly.)
Ref.
501 3539275 Plate, Relay Mounting 1
502 3740049 Relay, Bosch 8
503 0721003 Screw #10-24NC x 3/8in 8
504 4751000 Flatwasher #10 Regular 8
505 3311005 Locknut #10-24NC 8
506 Track Options: 1
3640970 Prior to S/N 0300035129
3641182 S/N 0300035129 to S/N 0300069000
507 4460601 Block, Terminal A/R
508 4460607 Stop, End 2
509 4460602 Barrier, Terminal 1
510 4460629 Marker, Terminal (6-15) 2
511 4460603 Bar, Buss - 10 Position (Cut into [2] 5 Position Bars) 1
512 4460600 Block, Terminal A/R
513 4460631 Marker, Terminal (Negative) 1
514 4460632 Marker, Terminal (1-5) A/R
515 4120013 Socket, Relay 3
516 4460613 Connector - 21 Position 1
517 4460503 Connector - 31 Position 1
518 Not Used
519 4240032 Tie-Strap (Not Shown) 20
520 4240018 Tie-Strap (Not Shown) 10
521 Relay, Socket Options: A/R
4120012 CE & EN280 Spec 1
Not Required Australian Spec 0
0259233/
0271474
BPE LOAD SENSING DEVICE INSTALLATION
(FRENCH SPEC) (S/N 0300058378 TO
S/N 0300064249)
Ref. 4/C
1/A
601 to 614 Not Used
615 3740057 Relay 1
616 4120012 Base, Relay 1
617 3740066 Spring, Relay 1
618 to 619 Not Used
620 4460428 Relief, Strain 1
FIGURE 4-3. PLATFORM CONSOLE ASSEMBLY (PRIOR TO S/N 0300064249) (CONTINUED)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.