Parts Manual User guide

3-20 600A 600AJ 3121206
SECTION 3 BOOM
422 1001113423 1 Support, Jib
423 0641604 2 Bolt 3/8in-16NC x 1/2in
1001115217 Ref. POWER TRACK INSTALLATION B
501 0100011 A/R Compound, Locking
502 to 504 Not Used
505 0641403 4 Bolt 1/4in-20NC x 3/8in
506 0641532 2 Bolt 5/16in-18NC x 4in
507 to 508 Not Used
509 1320243 1 Clamp, Block
510 3311505 2 Locknut 5/16in-18NC
511 to 513 Not Used
514 3539779 1 Plate, Cover
515 3570374 1 Plate
516 to 519 Not Used
520 4751400 4 Flatwasher 1/4in Regular
521 4751500 4 Flatwasher 5/16in Regular
Ref. PLATFORM SUPPORT INSTALLATION
1001115098 Ref. Machines without Load Sensing and without SkyGlazier A
See Note Ref. Machines without Load Sensing and with SkyGlazier (Note:
Refer to JLG Supplement p/n 3124242 for Components.)
See Note Ref. Machines with Load Sensing and without SkyGlazier (Note:
Refer to JLG Supplement p/n 3124287 for Components)
See Note Ref. Machines with Load Sensing and with SkyGlazier (Note: Refer
to JLG Supplement p/n 3124287 for Components)
601 0100011 A/R Compound, Locking
602 0641812 8 Bolt 1/2in-13NC x 1 1/2in
603 0642684 1 Bolt 1in-8NC x 10 1/2in
604 0681608 8 Bolt 3/8in-16NC x 1in
605 3300243 1 Locknut 1in-8NC (was p/n 3272605)
606 3311805 8 Locknut 1/2in-13NC
607 4891600 8 Flatwasher 3/8in Hardened
608 4891800 8 Flatwasher 1/2in Hardened
609 4892600 1 Flatwasher 1in Hardened
610 1001113465 1 Support Weldment
Ref. CABLE COVER INSTALLATION (600AJ ONLY)
0270820 Ref. ANSI, ANSI Export & Japanese Specs without 7500W
Generator
6
0272625 Ref. ANSI, ANSI Export & Japanese Specs with 7500W Generator 2
0275140 Ref. ANSI & ANSI Export Specs with Arctic Package without
7500W Generator
1
1001093432 Ref. ANSI & ANSI Export Specs with Arctic Package with 7500W
Generator
2
0273428 Ref. Australian Specs without 7500W Generator 2
0273430 Ref. Australian Specs with 7500W Generator 2
FIGURE 3-4. CHINA BUILT MACHINES/BOOMS & CYLINDERS INSTALLATION - 600AJ
ITEM # PART NUMBER QTY. DESCRIPTION REV.