Parts Manual User guide

7-68 600A 600AJ 3121206
SECTION 7 ELECTRICAL
With Generator:
1001100345 Receptacle Box Kit (220V CEE 7 Post Ground) (Includes
Items 808A, 808B, 808C, 808E & 808P) (1001100397
Installation)
2
1001100347 Receptacle Box Kit (220V CEE 7 Side Ground) (Includes
Items 808A, 808B, 808C, 808E & 808P) (1001100398
Installation)
3
1001100346 Receptacle Box Kit (220V AFSINT 107 Keyed Ground)
(Includes Items 808A, 808B, 808C, 808E & 808P)
(1001100399 Installation)
2
1001100341 Receptacle Box Kit (110V IEC Yellow) (Includes Items
808A, 808B, 808C, 808E & 808P) (1001100400 Installa-
tion)
2
1001100342 Receptacle Box Kit (220V IEC Blue) (Includes Items
808A, 808B, 808C, 808E & 808P) (1001100401 Installa-
tion)
2
1001100343 Receptacle Box Kit (220V CEE 7 Post Ground) (Includes
Items 808A, 808B, 808C, 808E & 808P) (1001100402
Installation)
B
1001100344 Receptacle Box Kit (220V CEE 7 Side Ground) (Includes
Items 808A, 808B, 808C, 808E & 808P) (1001100403
Installation)
B
809 Ref. 7500W SkyPower Generator Installation
1001115401 Ref. 60Hz & Caterpillar Engine C
1001115391 Ref. 60Hz & Deutz Engine C
1001115402 Ref. 50Hz Spec & Caterpillar Engine C
1001115392 Ref. 50Hz Spec & Deutz Engine B
0275257 Ref. 60Hz Spec & GM Engine F
Ref. Note: SkyPower generator is standard on ANSI & CSA
Specs. Optional on All Other Specs.
809A 1 Receptacle, Female Twist-Lock Options:
4460958 60Hz Spec
See Note 50Hz Spec (Note: Not Available - Purchase Locally)
809B 2 Gasket Options:
3960422 60Hz Spec
See Note 50Hz Spec (Note: Not Available - Purchase Locally)
809C 1 Cover, Receptacle Options:
1001110873 60Hz Spec
See Note 50Hz Spec (Note: Not Available - Purchase Locally)
809D 1 Cover, Receptacle Options:
1001110872 60Hz Spec
See Note 50Hz Spec (Note: Not Available - Purchase Locally)
809E 1 Receptacle Options:
4460346 60Hz Spec
See Note 50Hz Spec (Note: Not Available - Purchase Locally)
809F 4460051 1 Connector, Strain Relief
809G 4460071 1 Connector, Strain Relief
809H 4922925 1 Harness, Generator
FIGURE 7-7. HARNESS COMPONENTS INSTALLATION (WITH UGM) (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.