Parts Manual User Manual

3121617 600A 600AJ 2-91
SECTION 2 TURNTABLE
FIGURE 2-20. 7500W SKYPOWER GENERATOR INSTALLATION - GM ENGINES
ITEM # PART NUMBER QTY. DESCRIPTION REV.
0275257 Ref. 7500W SKYPOWER GENERATOR INSTALLATION F
Ref. Note: SkyPower Generator is Standard On ANSI & CSA
Specs. Optional on All Other Specs.
Ref. Note: See Section 7 for Boom Cable Components.
1 0100011 A/R Compound, Locking
2 0100019 A/R Compound, Locking
3 0480142 1 Belt, Generator
4 0641405 6 Bolt 1/4in-20NC x 5/8in
5 0641505 4 Bolt 5/16in-18NC x 5/8in
6 0641516 3 Bolt 5/16in-18NC x 2in
7Not Used
8 0641808 4 Bolt 1/2in-13NC x 1in
9 0700820 1 Bolt, Metric M8 x 60mm
10 0701016 1 Bolt, Metric M10 x 40mm
11 0860038 2 Box, Switch
12 0861538 1 Control Box Assembly
7024488 1 Card, Circuit - Generator Power
See Note 1 Fuse (Note: Not Available - Purchase Locally)
7024489 1 Card, Circuit - Control
70000619 1 Harness, Circuit Card
13 0861542 1 Junction Box Assembly (See Items 101-127 for Breakdown)
14 0902888 1 Bracket, Box Mounting
15 0962520 1 Bushing, Split Taper
16 to 17 Not Used
18 2460048 1 Generator Assembly
Use 70003631 1 Brushholder Assembly (Not Shown) (was p/n 7024484)
7024485 1 Breaker, Circuit 30Amp (Not Shown)
70001696 1 Boot, Breaker (was p/n 7024486 - Not Shown)
70001966 1 Bearing, Ball Radial (Located In Belt Tensioner Endbell - Not
Shown)
7027799 1 Block, Connector 6 Position (Not Shown)
70002460 6 Nut, Brass (Attaches p/n 7027799 to Cover) (Not Shown)
7026188 1 Clamp, Cable (Not Shown)
7026597 1 Connector, W/Leads (Not Shown)
70002088 1 Stator (Not Shown)
Use 70004169 1 Panel, End (Not Shown) (was p/n 70002255)
70001974 1 Decal - Terminal Connections (Not Shown)
70000863 1 Fan (Not Shown)
70002297 4 Stud (Not Shown)
18A Use 70004171 1 Key (was p/n 7024561)
70001100 1 Armature, Generator (Includes Radial Ball Bearing on End with
Brushes and Fan)
70001384 1 Bearing, Ball Radial
18B 70001966 Bearing, Radial Ball
70003708 1 Ring, Internal Retaining (Located in Belt Tensioner Endbell)
70003709 1 Ring, External Retaining (Located in Belt Tensioner Endbell)
18C 70001973 1 Decal - Warning Moving Parts
18D Use 70004169 1 Endbell, Brush Block (was p/n 70001385)