Parts Manual User Manual

3121617 600A 600AJ 10-5
SECTION 10 SPECIAL OPTIONS
Ref. Sky Accessory:
Note: For Breakdown of Sky Accessories Refer to Accessory
Manual p/n 3124242
1001098149 Ref. SkyCutter (All Specs except CE & Australian Specs)
0273353 Ref. Skycutter/Sky Welder Combo (All Specs except CE & Australian
Specs)
1001101422 Ref. SkyGlazier without Load Sensing (English Language Decals)
(ANSI & CSA Specs)
1001102647 Ref. SkyGlazier with Load Sensing (English Language Decals)
(Australian Specs)
1001099421 Ref. SkyGlazier (600A Only) (Spanish Language Decals) (ANSI
Export Specs)
1001099422 Ref. SkyGlazier (600A Only) (Portuguese Language Decals)
(Brazilian Specs)
0272254 Ref. SkyWelder - Stick, 250A (ANSI, ANSI Export & CSA Specs)
0272521 Ref. SkyWelder - Stick, 250A (ANSI Export, Australian, CE, &
Japanese Specs)
Ref. Strobe Light Installations (Amber)
1001152965 Ref. Platform Mounted
1001154231 Ref. Platform/Ground Mounted
0272301 Ref. Tire Sealant Installation
Ref. Tools for Service
2901443 1 Analyzer Kit
7002840 1 Antirotation Pin Removal Tool
8896941 1 Wire Stripper
7002821 1 Wire Crimper (To install wire ends to wires)
7002823 1 Pin/Socket Extractor - Universal (To Remove Pins/
Sockets from Connectors)
4460467 1 Extractor - 16-18 Gauge (For Removal of Pin/Sockets
from Deutsch Connectors)
4460510 1 Extractor - 12-14 Gauge (For Removal of Pin/Sockets
from Deutsch Connectors)
7002822 1 Screwdriver, Potentiometer (To Adjust Drive Controllers)
7016654 1 Screwdriver, Magnetic
7004275 1 Seal Installation Tool - 1”
7004276 1 Seal Installation Tool - 1 1/2”
7002826 1 Seal Installation Tool - 2”
7016655 1 Wire Rope Sheave Gauge
7016652 1 Huck Bolt Fastener (For Small Huck Bolts Only)
2900838 1 U.S. Standards Fastener (Hardware) Kit
7014676 1 U.S. Standards Tool Kit
1001137005 1 Software Cable Kit
0256344 Ref. Weld Leads Installation - 600A
0272772 Ref. Weld Leads Installation - 600AJ (1 Cable)
Note: This list is to accommodate machines ordered with special equipment. Options may not
be applicable to all models. For more specific parts information contact JLG Parts Department.
FIG & ITEM # PART NUMBER QTY. DESCRIPTION REV.