Service Manual Instruction Manual

SECTION 6 - JLG CONTROL SYSTEM
3121616 – JLG Lift – 6-47
600AJ
GEN SET / WELDER
GEN SET CUTOUT
HEAD & TAIL LIGHTS
CABLE BREAK SWITCH
LOAD SYSTEM
LOAD SENSOR
FUNCTION CUTOUT
GROUND ALARM
ANSI USA 0 1 0 1 0 1 0 1 0 X X X X 0 1 0 X 2 X 0 1 2 3
ANSI EXPORT 0 1 0 1 0 1 0 1 0 1 2 3 4 0 1 0 1 2 3 0 1 2 3
CSA 0 1 0 1 0 1 0 1 0 X X X X 0 1 0 1 2 3 0 1 2 3
CE 0 1 0 1 0 1 0 1 0 X 2 3 X 0 1 0 1 X X 0 1 2 3
AUSTRALIA 0 1 0 1 0 1 0 1 0 X 2 X X 0 1 0 1 2 3 0 1 2 3
JAPAN 0 1 0 1 0 1 0 1 0 1 2 3 4 0 1 0 1 2 3 0 1 2 3
NOTE: Bold Italic Numbers indicate the default setting. Plain text indicates another available selection. Bold, Italic underlined numbers
indicate the default when the option is factory installed.
NOTE: Bold Italic Numbers indicate the default setting. Plain text indicates another available selection. Bold, Italic underlined numbers
indicate the default when the option is factory installed.
600AJ
DRIVE TYPE
DISPLAY UNITS
LEVELING MODE
DRIVE CONTROL BOOM CONTROL
CLEARSKY
CRIBBING OP
FUEL TANK SIZE
ALARM/HORN
ANSI USA 0 1 2 0 1 0 1 0 1 2 0 1 0 1 0 1 0 1 0 1
ANSI EXPORT 0 1 2 0 1 0 1 0 1 2 0 1 0 1 0 1 0 1 0 1
CSA 0 1 2 0 1 0 1 0 1 2 0 1 0 1 0 1 0 1 0 1
CE 0 1 2 0 1 0 1 0 1 2 0 1 0 1 0 1 0 1 0 1
AUSTRALIA 0 1 2 0 1 0 1 0 1 2 0 1 0 1 0 1 0 1 0 1
JAPAN 0 1 2 0 1 0 1 0 1 2 0 1 0 1 0 1 0 1 0 1