Service Manual

SECTION 1 - SPECIFICATIONS
3121202 – JLG Lift – 1-11
7. Hydraulic Tank
Lube Point(s) - Fill Cap
Capacity - 30.6 gal. Tank; 32.7 gal. System
Lube - HO
Interval - Check Level daily; Change every 2 years or
1200 hours of operation.
8. Suction Strainers (in tank)
Lube Point(s) - 2
Interval - Every 2 years or 1200 hours of operation,
remove and clean at time of hydraulic oil change.
9. Oil Change w/Filter - Ford LRG425
Lube Point(s) - Fill Cap/Spin-on Element
Capacity - 4.5 Quarts
Lube - EO
Interval - 3 Months or 150 hours of operation
Comments - Check level daily/Change in accor-
dance with engine manual.
10. Oil Change w/Filter - Deutz
Lube Point(s) - Fill Cap/Spin-on Element
Capacity - 11 Quarts Crankcase; 5 Quarts Cooler
Lube - EO
Interval - Check level daily; Change every Year or
1200 hours of operation, whichever comes first.
Adjust final level by mark on dipstick.
11. Oil Change w/Filter - Caterpillar
Lube Point(s) - Fill Cap/Spin-on Element
Capacity - 10.6 Quarts
Lube - EO
Interval - 3 Months or 150 hours of operation
Comments - Check level daily/Change in accor-
dance with engine manual.
NORMAL OPERATING
RANGE WITH BOOM
IN STOWED POSITION
REMOVE FILL CAP PLATE FROM
TANK TO GAIN ACCESS TO
STRAINERS