Service Manual

SECTION 3 - CHASSIS & TURNTABLE
3121202 – JLG Lift – 3-11
Cover Disassembly
1. Remove O-Ring (17) from groove in Cover (6A).
2. Remove Thrust Washer (2) from Cover (6A) pockets.
3. Unscrew two Hex Head Bolts (6C) and remove Dis-
engage Cap (6B) from Cover (6A).
4. Pull Disengage Rod (6D) out from Cover (6A).
5. Use appropriate tool to remove O-ring (6E) from
internal groove in Cover (6A).
6. Remove two O-Ring Pipe Plugs (6F) from Cover
(6A).
2. Thrust Washer
6A. Cover
6B. Disengage Cap
6C. Bolt
6D. Disengage
Rod
6E. O-Ring
6F. Pipe Plug
17. O-Ring
Figure 3-9. Cover