Service Manual User guide

SECTION 3 - CHASSIS, PLATFORM & SCISSOR ARMS

3121322 – JLG Lift – 3-15

Engine Tray Slide

The engine tray can be slide outward approximately 5.9

in. (15 cm) when servicing components inside the engine

compartment.

1. Remove the two Bolts (1) and Lockwashers (2) on

the front of the engine tray.

2. Loosen the two top Bolts (3) at both ends of the

engine compartment. Slide engine tray outward.

3. Be sure to return engine tray to stowed position

when finished servicing. Secure engine tray with the

two front Bolts (1) and Lockwashers (2) and two top

Bolts (3).

1, 2

Figure 3-12. Engine Tray Slide

1. Bolt, M16 x 30mm

2. Lockwasher, M16

3. Bolt, M16 x 60mm