User Manual

9.49
L2906H, 2906H, 3507H, 619A, 723A, 29.6LP, 29.6, 35.7
Electrical System
9.17.2 Analyzer Software - Version 3.5
(Sheet 1 of 2)
MENU:
ACCESS LEVEL 3
MENU:
PERSONALITIES
PERSONALITIES:
MAIN LIFT
PERSONALITIES:
BUCKET LIFT
PERSONALITIES:
PLATFORM LIFT
PERSONALITIES:
TELESCOPE
PERSONALITIES:
BUCKET TELESCOPE
PERSONALITIES:
PLAT. TELESCOPE
PERSONALITIES:
FORK TILT
PERSONALITIES:
PLATFORM LEVEL
PERSONALITIES:
PLATFORM ROTATE
PERSONALITIES:
STABILIZERS
PERSONALITIES:
FRAME LEVEL
PERSONALITIES:
AUX. FUNCTION1
PERSONALITIES:
AUX. FUNCTION2
PERSONALITIES:
AUX. MOMENTARY
ACCESS LEVEL:
CODE: 00000
MAIN LIFT:
DECEL UP: x.x S
BUCKET LIFT:
DECEL UP: x.x S
PLATFORM LIFT:
DECEL UP: x.x S
TELESCOPE:
DECEL IN: x.x S
BUCKET TELE:
DECEL UP: x.x S
PLAT. TELESCOPE:
DECEL IN: x.x S
FORK TILT:
DECEL UP: x.x S
PLATFORM ROTATE:
DECEL LEFT: x.x S
STABILIZERS:
DECEL UP: x.x S
AUX. FUNCTION1:
DECEL COIL A: x.x S
AUX. MOMENTARY:
COIL B: xxxx mA
MAIN LIFT:
ACCEL UP: x.x S
BUCKET LIFT:
ACCEL UP: x.x S
PLATFORM LIFT:
ACCEL UP: x.x S
TELESCOPE:
ACCEL IN: x.x S
BUCKET TELE:
ACCEL UP: x.x S
PLAT. TELESCOPE:
ACCEL IN: x.x S
FORK TILT:
ACCEL UP: x.x S
PLATFORM ROTATE:
ACCEL LEFT: x.x S
STABILIZERS:
ACCEL UP: x.x S
AUX. FUNCTION1:
ACCEL COIL A: x.x S
AUX. MOMENTARY:
COIL A: xxxx mA
MAIN LIFT:
ACCEL DOWN: x.x S
BUCKET LIFT:
ACCEL DOWN: x.x S
PLATFORM LIFT:
ACCEL DOWN: x.x S
TELESCOPE:
ACCEL OUT: x.x S
BUCKET TELE:
ACCEL DOWN: x.x S
PLAT. TELESCOPE:
ACCEL OUT: x.x S
FORK TILT:
ACCEL DOWN: x.x S
PLATFORM ROTATE:
ACCEL RIGHT: x.x S
STABILIZERS:
ACCEL DOWN: x.x S
AUX. FUNCTION1:
ACCEL COIL B: x.x S
MAIN LIFT:
DECEL DOWN: x.x S
BUCKET LIFT:
DECEL DOWN: x.x S
PLATFORM LIFT:
DECEL DOWN: x.x S
TELESCOPE:
DECEL OUT: x.x S
BUCKET TELE:
DECEL DOWN: x.x S
PLAT. TELESCOPE:
DECEL OUT: x.x S
FORK TILT:
DECEL DOWN: x.x S
PLATFORM ROTATE:
DECEL RIGHT: x.x S
STABILIZERS:
DECEL DOWN: x.x S
AUX. FUNCTION1:
DECEL COIL B: x.x S
MAIN LIFT:
MIN UP: xxx mA
BUCKET LIFT:
MIN UP: xxx mA
PLATFORM LIFT:
MIN UP: xxx mA
TELESCOPE:
MIN IN: xxx mA
BUCKET TELE:
MIN UP: xxx mA
PLAT. TELESCOPE:
MIN IN: xxx mA
FORK TILT:
MIN UP: xxx mA
PLATFORM ROTATE:
MIN LEFT: xxx mA
STABILIZERS:
MIN UP: xxx mA
AUX. FUNCTION1:
MIN COIL A: xxx mA
MAIN LIFT:
MAX UP: xxxx mA
BUCKET LIFT:
MAX UP: xxxx mA
PLATFORM LIFT:
MAX UP: xxxx mA
TELESCOPE:
MAX IN: xxxx MA
BUCKET TELE:
MAX UP: xxxx mA
PLAT. TELESCOPE:
MAX IN: xxxx mA
FORK TILT:
MAX UP: xxxx mA
PLATFORM ROTATE:
MAX LEFT: xxxx mA
STABILIZERS:
MAX UP: xxxx mA
AUX. FUNCTION1:
MAX COIL A: xxxx mA
MAIN LIFT:
MIN DOWN: xxx mA
BUCKET LIFT:
MIN DOWN: xxx mA
PLATFORM LIFT:
MIN DOWN: xxx mA
TELESCOPE:
MIN OUT: xxx mA
BUCKET TELE:
MIN DOWN: xxx mA
PLAT. TELESCOPE:
MIN OUT: xxx mA
FORK TILT:
MIN DOWN: xxx mA
PLATFORM ROTATE:
MIN RIGHT: xxx mA
STABILIZERS:
MIN DOWN: xxx mA
AUX. FUNCTION1:
MIN COIL B: xxx mA
SOFT-LIFT %:
SET DERATE: xx %
SOFT-LIFT %:
SET DERATE: xx %
SOFT-LIFT %:
SET DERATE: xx %
SOFT-LIFT ZONE:
SET ANGLE %: xx %
SOFT-LIFT ZONE:
SET ANGLE %: xx %
SOFT-LIFT ZONE:
SET ANGLE %: xx %
MAIN LIFT:
MAX DOWN: xxxx mA
BUCKET LIFT:
MAX DOWN: xxxx mA
PLATFORM LIFT:
MAX DOWN: xxxx mA
TELESCOPE:
MAX OUT: xxxx mA
BUCKET TELE:
MAX DOWN: xxxx mA
PLAT. TELESCOPE:
MAX OUT: xxxx mA
FORK TILT:
MAX DOWN: xxxx mA
PLATFORM ROTATE:
MAX RIGHT: xxxx mA
STABILIZERS:
MAX DOWN: xxxx mA
AUX. FUNCTION1:
MAX COIL B: xxxx mA
MENU:
CALIBRATIONS
CALIBRATIONS:
TILT SENSOR
CALIBRATIONS:
BOOM ANGLE
CALIBRATIONS:
LSS
CALIBRATIONS:
PARK BRAKE TEST
CALIBRATION:
COMPLETE
PRESS ENTER AT
LOWEST POSITION.
CONFIRM PLATFORM
IS EMPTY:NO
SET PARK
BRAKE
CALIBRATE TILT
SENSOR?
CALIBRATE BOOM
ANGLE SENSOR?
PLATFORM TYPE:
450 - EXTENDABLE
PERFORM PARK
BRAKE TEST?
BOOM ANGLE:
CALIBRATING …
CALIBRATION:
IN PROGRESS
SHIFT TO
SECOND GEAR
LIFT UP. PRESS
ENTER AT TOP.
WARNING: DRIVE
WILL BE ENGAGED
BOOM ANGLE:
CALIBRATING …
FORWARD TO START
NEUTRAL TO PAUSE
CALIBRATION:
COMPLETE
PARK BRAKE TEST
COMPLETE
MENU:
OPERATOR TOOLS
CHANGE
ANTI-THEFT CODE?
PERFORM HARDWARE
EXCHANGE: NO
CONFIRM MACHINE
SERVICE?
REVIEW
SERVICE HISTORY?
SET SERVICE
INTERVAL: 100H
VEHICLE SPEED
UNITS: KPH
TEMPERATURE:
CELCIUS
OIL PRESSURE:
BAR
CABIN JOYSTICK:
TELESCOPE: X-AXIS
STEER MODE:
AUTOMATIC
TRANSFER STATU S:
CYCLE POWER NOW
ENTER NEW
CODE 0000
TRANSFER FROM:
UGM à DISPLAY
ENTER CURRENT
CODE: 0000
TRANSFER FROM:
DISPLAY à UGM
SERVICE COMPLETE
YES: ENTER, NO: ESC
SERVICE HISTORY
1: XXXX HOURS
VEHICLE SPEED
UNITS: MPH
TEMPERATURE:
FAHRENHEIT
OIL PRESSURE:
PSI
CABIN JOYSTICK:
TELESCOPE: ROLLER
STEER MODE:
MANUAL
MENU:
HELP: PRESS ENTER
HELP: (XXXXX)
?????????????????
PERSONALITIES:
BUCKET TILT
BUCKET TILT:
DECEL UP: x.x S
BUCKET TILT:
ACCEL UP: x.x S
BUCKET TILT:
ACCEL DOWN: x.x S
BUCKET TILT:
DECEL DOWN: x.x S
BUCKET TILT:
MIN UP: xxx mA
BUCKET TILT:
MAX UP: xxxx mA
BUCKET TILT:
MIN DOWN: xxx mA
BUCKET TILT:
MAX DOWN: xxxx mA
PLATFORM LEVEL:
DECEL UP: x.x S
PLATFORM LEVEL:
ACCEL UP: x.x S
PLATFORM LEVEL:
ACCEL DOWN: x.x S
PLATFORM LEVEL:
DECEL DOWN: x.x S
PLATFORM LEVEL:
MIN UP: xxx mA
PLATFORM LEVEL:
MAX UP: xxxx mA
PLATFORM LEVEL:
MIN DOWN: xxx mA
PLATFORM LEVEL:
MAX DOWN: xxxx mA
FRAME LEVEL:
DECEL LEFT: x.x S
FRAME LEVEL:
ACCEL LEFT: x.x S
FRAME LEVEL:
ACCEL RIGHT: x.x S
FRAME LEVEL:
DECEL RIGHT: x.x S
FRAME LEVEL:
MIN LEFT:xxxmA
FRAME LEVEL:
MAX LEFT: xxxx mA
FRAME LEVEL:
MIN RIGHT: xxx mA
FRAME LEVEL:
MAX RIGHT: xxxx mA
AUX. FUNCTION2:
DECEL COIL A: x.x S
AUX. FUNCTION2:
ACCEL COIL A: x.x S
AUX. FUNCTION2:
ACCEL COIL B: x.x S
AUX. FUNCTION2:
DECEL COIL B: x.x S
AUX. FUNCTION2:
MIN COIL A: xxx mA
AUX. FUNCTION2:
MAX COIL A: xxxx mA
AUX. FUNCTION2:
MIN COIL B: xxx mA
AUX. FUNCTION2:
MAX COIL B: xxxx mA
CALIBRATIONS:
LSI-CAN CHECK PT
REMOVE WEIGHTS
AND ATTACHMENTS.
SET LSI-CAN
CHECK POINT:NO
TELESCOPE IN AND
FULLY LIFT UP.
**** STOP ****
WAIT 1 MINUTE
PRESS ENTER TO
SET CHECK POINT
PERFORM LSI-CAN
SYSTEM CHECK? YES
FULLY DEPLOY
STABILIZERS.
REMOVE WEIGHTS
AND ATTACHMENTS.
TELESCOPE IN AND
FULLY LIFT UP.
**** STOP ****
WAIT 1 MINUTE
PRESS ENTER TO
START TEST: ----
- Requires ACCESS LEVEL 3, 2, 1 and 0 - Requires ACCESS LEVEL 2, 1 and 0 - Not ACCESSABLE
Note
: The layout shows all possible analyzer screens. Please note, some screens may not be available depending upon machine configur
ation.
MAM2831-3.5