User Manual

5-11
L2906H, 2906H, 3507H, 619A, 723A, 29.6LP, 29.6, 35.7
Axles, Drive Shafts, Wheels and Tires
2. Install washers on the wheel studs.
3. Start all lug nuts by hand to prev ent cross threading.
DO NOT use a lubricant on threads or nuts.
4. Tighten lug nuts in an alternating pattern as
indicated in figure. Torque to 300 Nm (221 lb-ft).
5. Remove machine fr om supports,
6. Remove the Do Not Operate Tag from the ignition
key switch and the ste er in g wheel .
5.7 STEERING ANGLE ADJUSTMENT
Detailed axle service instructions are provided in the Axle
Disassembly & Assembly Manual, refer to Section 5.4.2,
“Axle Specifications.”
5.8 BRAKES
5.8.1 Brake Disc Inspection
Detailed axle service instructions are provided in the Axle
Disassembly & Assembly Manual, refer to Section 5.4.2,
“Axle Specifications.”
OAH0990
1
2
3
4
5
6
78