Parts Manual Manual

3120800 2-45
S
E
C
T
I
O
N
2
T
U
R
N
T
A
B
L
E
SECTION 2 TURNTABLE
FIGURE 2-13. SWING BRAKE ASSEMBLIES (APRIL 1992 TO PRESENT)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
SWING BRAKE ASSEMBLIES: Ref.
0920083 Machines Built Through 1992 Ref. —
0920083 Machines Built 1993 To S/N 33476 Ref. A
0920109 Machines Built S/N 33476 To Present Ref. —
1 Kit Seal, Oil 1
2 Kit Bearing 1
3 7007977 Ring, Retaining 1
4 Not Used
5 Ring, Retaining Options: 1
Not Required Machines Built Through 1992
7011716 Machines Built 1993 to Present
6 Housing Options: 1
7007981 Machines Built Through 1992
7011713 Machines Built 1993 to S/N 33476
7018605 Machines Built S/N 33476 to Present
7 Shaft Options: 1
7011718 Machines Built Through 1992
7011720 Machines Built 1993 to Present
8 Guide, Spring Options: 1
Not Required Machines Built Through 1992
7011717 Machines Built 1993 to S/N 33476
7018606 Machines Built S/N 33476 to Present
9 Spring Options: 6
7007979 Spring, (Small) Machines Built Prior to S/N 33476
7007970 Spring, (Red) Machines Built S/N 33476 to Present
10 Spring Options: A/R
7007980 Spring, (Large) Machines Built Prior to S/N 33476 6
7018602 Spring, (Blue) Machines Built S/N 33476 to Present 3
11 Kit Seal, Case 1
12 Plate Options:
Machines Built Prior to S/N 33476
Kit Plate, Return 1
7011715 Separator Assembly 2
7011714 Pin 4
7007983 Separator 2
Machines Built S/N 33476 to Present
Kit Plate, Separator 1
13 7011719 Cover 1
14 7007914 Screw, Bleeder (Prior to S/N 33906 Only) 1 —
15 7007987 Pin, Dowel 2
16 Kit Ring, Back-Up (Inner) 1
17 Kit O-Ring (Inner) 1
18 Kit Ring, Back-Up (Outer) 1
19 Kit O-Ring (Outer) 1
20 Kit Rotor 2
21 Kit Stator 2